November 2018

 

November 2018
PRODUCT INTRODUCTIONS GLOBAL NEWS CAMPAIGNS & CONTESTS
 

PRODUCT INTRODUCTIONS

 
 
HERO I SMART 110CC
PISTON SET (01866GMP)
 
TECHNICAL DATA PISTONS
Nominal Bore Diameter 53.00 mm
Compression Height 20.8
Total Height 35.8
Piston-Liner Clearence 0.035 (approx.)
Pin OD x Length 13.0x 39.0
Ring Grooves 0.8 / 0.8 / 1.5
TECHNICAL DATA RING SET NO. 2279GTP
Parameter 1st, Comp. 2nd, Comp. 3rd, Oil
Ring Feature Steel , Nitrided KV1, Taper faced 3POR, Chrome Steel side rails
Axial Ht. 0.8 0.8 1.5
End Gap 0.10 .. 0.25 0.10 .. 0.25 0.20 .. 0.70
Some features & benefits:
  • As Cast crown and special aluminum alloy for strength
  • Oil holes in oil ring groove for lower oil consumption.
  • ELASTOVAL design for high strength to weight ratio
  • Oil retention grooves for better lubrication
COMPARISON WITH COMPETITOR
Competition FM
  • OLD DESIGN
  • LOW STRENGTH TO WEIGHT RATIO
  • WIDER SKIRT WHICH MEANS HIGHER FRICTION
  • HIGHER FRICTION RESULTS IN LOW MILEAGE
  • LATEST ELASTOVAL DESIGN
  • HIGH STRENGTH TO WEIGHT RATIO
  • LOW FRICTION PISTON ARCHITECTURE
  • LOW FRICTION RESULTS IN HIGH MILEAGE
 
TATA MAGIC IRIS / ACE ZIP
 
Cross Section at 'x'
PART NUMBER CONSTRUCTION / MATERIAL COMPRESSED THICKNESS (MM) BORE DIAMETER (MM)
PCH20250GPSC10000E (1 CUT) COMPOSITE 1.05 92
PCH20250GPSC20000E (2 CUT) COMPOSITE 1.25
PCH20250GPSC30000E (3 CUT) COMPOSITE 1.5
 
EICHER CANTER E483/E683 TCI
PISTONS RINGS (6858STLPREM-SD)
 
PARAMETER SPEC
Diameter 100
No of Rings 3
No of cylinder set 1
Size STD
GROOVE RING TYPE SPECIAL FEATURES BENEFITS
1st
Chrome inlay, KV1
Axial Height – 3.0 mm
Close Gap – 0.3 .. 0.5
  • Chrome ensures minimal wear & provides excellent scuff resistance.
  • KV1-high strength material for greater bending break & wear resistance.
  • Barrel Honing provides better sealing with high surface pressure.
  • Inlaid design for low oil consumption
  • Longer Ring life
  • Lesser oil consumption
2nd
Chrome, STD
Axial Height – 2.0 mm
Close Gap – 0.30 .. 0.50
  • PROFILE GROUND ensures unifrm pressure on the liner.
  • Honed land
  • Taper faced scraper for enhanced performance.
  • Phosphating coating increases oil retention property, reduces bedding in time and provides corrosion resistance
  • Lesser Oil Consumption
  • Long Ring Life
  • Better bedding in
3rd
Axial Height – 3.00 mm
End Gap - 0.20 – 0.40mm
  • NITRIDED COATED FOR minimal wear
  • Exerts uniform wall pressure and excellent side sealing.
  • Effective side sealing due to specially designed expander large oil drainage area
  • Narrow lands
  • STEEL-high strength material for greater bending break & wear resistance.
  • Longer life
  • Longer Ring life
  • Lesser oil consumption
 
CHEVROLET AVEO / BEAT
BRAKE SHOES (FSB4303QS)
 
     
 
LENGTH (MM) WIDTH (MM) THICKNESS (MM) LEVER MASTER PACK
165 35 5.2 With Lever 5
 
CHEVROLET ENJOY
BRAKE SHOES (FSB4304QS)
 
     
 
LENGTH (MM) WIDTH (MM) THICKNESS (MM) LEVER MASTER PACK
224 40.4 4.7 Without Lever 5
 
BAJAJ PULSAR 200 NS
PISTON SET (01056RMP)
 
TECHNICAL DATA PISTONS
Nominal Bore Diameter 72.00 mm
Compression Height 21.8
Total Height 39.1
Piston-Liner Clearence 0.035 (approx.)
Pin OD x Length 17.0 x 50.0
Ring Grooves 1.0 / 1.0 / 2.0
Some features& benefits:
  • As Cast crown and special aluminum alloy for strength
  • Oil holes in oil ring groove for lower oil consumption.
  • Moly Coated skirt for scuffing resistance, initial lubrication and longer service life.
  • Holes on skirt and oil grove for better oil drainage
TECHNICAL DATA RINGS
Parameter 1st, Comp. 2nd, Comp. 3rd, Oil
Ring Feature Steel , Chrome KV1, Taper faced 3POR, Chrome Steel side rails
Axial Ht. 1.0 1.0 2.0
End Gap 0.15 .. 0.30 0.15 .. 0.35 0.20 .. 0.70
Special Features Benefits to customer
Special Aluminum Silicon Alloy Lesser expansion hence can work with lesser clearance.
CNC machined Profile Controlled performance parameters for best results
Solid Section Above Pin boss Provides more strength to piston and hence longer life.
Optimized Inner Contour Piston can withstand heavy thermal loads .
Thin Top Land Lesser dead volume & lesser emissions
Moly Coated Better initial lubrication and long service life
Steel Rings For greater strength
Chrome rings For better wear resistance
 

GLOBAL NEWS

SEAP Regional DC Opens in Singapore

 

At the beginning of September, Federal-Mogul Motorparts opened a new regional distribution center in Singapore.  Located in the west of Singapore at Toll Logistics’ state-of-the-art Toll City facility, the warehouse will stock fast moving SKUs to Southeast Asia (SEAP).  The facility will service all countries in the region and reduce lead times to a maximum of two weeks, down from a previous six-to-eight-week window.

Pictured is the SEAP team, who were invited to tour the facility to celebrate successful project completion.

 

TENNECO SIGNS DEFINITIVE AGREEMENT TO ACQUIRE ÖHLINS RACING A.B.

 

Tenneco Inc. (NYSE: TEN) announced that it has signed a definitive agreement to acquire Öhlins Racing A.B. (“Öhlins”), a Swedish technology company that develops premium suspension systems and components for the automotive and motorsport industries.

“Tenneco’s 20 year relationship with Öhlins has delivered world class products in the intelligent suspension market and provides a strategic entry into advanced performance communities with premium branded products and proprietary Continuously Controlled Electronic Suspension Valve (CES) technology.” said Brian Kesseler, co-CEO, Tenneco. “Öhlins’ technology team will allow us to rapidly grow our product offerings for current and future customers, as well as help us win a larger share of business in developing mobility markets. I am delighted to welcome the Öhlins team as an important part of our new Aftermarket and Ride Performance company.”

The addition of Öhlins will accelerate the development of advanced original equipment (OE) intelligent suspension solutions, while also fast-tracking time to market. It will also enhance Tenneco’s portfolio in broader mobility markets with the addition of Öhlins’ range of premium OE and aftermarket automotive and motorsports performance products.

Founder Kenth Öhlin will retain a minority interest in Öhlins and partner with Tenneco to provide continuity in his strategic and technological vision. The acquisition is expected to close in the first quarter of 2019, subject to regulatory approvals and other customary closing conditions. Total consideration for this acquisition is approximately $160 million, which was contemplated in the leverage targets provided in April 2018 as part of the Federal-Mogul acquisition announcement

 

F-M Motorparts Mexico Attends INA PAACE Automechanika

 

Federal-Mogul Motorparts team participated in INA PAACE Automechanika Mexico 2018, the largest exhibition for the automotive industry in Mexico.  The exhibition center housed more than 500 exhibitors from around the world and hosted 20,000 specialized visitors. The Federal-Mogul Motorparts stand featured examples of how the team responds to the global needs of our customers, suppliers, employees and end users with three key strategies: digital marketing, training and through new product launches.

Those attending the expo were able to participate in “soft trainings” for each of the five product systems.  These are 15-minute training sessions scheduled every hour where the product team talks about the characteristics, advantages, benefits and relevant information of certain product lines.  After receiving their training, attendees could further their learning experiences through participating in various activities based on the content of the training.

 

Motorparts Exhibits at Automechanika Frankfurt

 

Federal-Mogul Motorparts attended this year’s 25th Automechanika show in Frankfurt, Germany, September 11-15.  The event marked the launch of Federal-Mogul Motorparts’ training and support platform, Garage Gurus™, in EMEA.  Additionally, braking products from Ferodo® and Jurid®; chassis components from MOOG®; ignition products from Champion® and BERU®; and engine products from AE®, Goetze®, Nural® and Payen®, grouped under Federal-Mogul Motorparts’ Engine Expertise umbrella, were on display.

“Automechanika is a great platform to launch our newest technologies and products,” explained Andrew Sexton, President, EMEA Aftermarket; and Regional President, Federal-Mogul Motorparts, EMEA. “This industry is all about innovation, and to be successful, you need to be constantly developing new technology and predicting the trends. We have always prided ourselves on the product offerings our brands bring to the market: high quality products that technicians across the world can trust. With the addition of Garage Gurus, we are providing world-class technical support and training to customers, technicians and end-users across EMEA.”

With around 136,000 trade visitors from 181 countries attending the show in 2018, Automechanika is the world’s leading trade fair for the automotive aftermarket industry, providing a unique depth of product and technology coverage. It attracts the top automotive industry suppliers and provides a showcase to demonstrate new technologies that display the potential to impact the entire supply chain.  The trade fair takes place every two years, alternating with the IAA.

 

CAMPAIGNS & CONTESTS

 
 

View our loyalty programs - www.retailstars.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
 
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
www.championparts.in
www.ferodo.in
+91-124-4786708

 

October 2018

 

October 2018
PRODUCT INTRODUCTIONS MARKET ACTIVITIES MARKET TRENDS & HIGHLIGHTS CAMPAIGNS & CONTESTS
 

PRODUCT INTRODUCTIONS

 
ALTO K10 , WAGON-R
SPARK PLUG (CCHRA7YCKAM4)
 
   
Single Unit Pack
 
Pack of four Spark Plugs
 
 
Parameter Specification Features
Hexagon Size 16mm
  • Superior corrosion resistance
  • Dependable and proven performance
  • Increased conductivity and heat control for good overall wear
  • Made with Latest FISS technology
Insulator Shape 10.5mm Ø With Ribs
Terminal Solid post
Seat Steel Gasket
Thread and Thread Length M12 x 1,25mm / 19 mm
Gap 0.9mm
Resistor Yes
Nose projection 1.5mm
Resistor type FISS
 
LEYLAND 401/402/411
ENGINE VALVE (GV03107N06-SD)
 
 
Size Std
Cyl. Bore Dia. 107.25mm, 6 cyl. set
Master Pack 10
 
PARAMETER INLET VALVE EXHAUST VALVE
Material 21-4N 21-4N
Head Diameter 45.72 42.80
Stem Diameter 8.66 8.635
Coating Chrome Chrome
Seat Angle 60Deg 60Deg
Length 145.8 145.8
Contents 6 each 6 each
 
 
MAHINDRA SWARAJ XM 724/735 AVL
GOETZE PISTONS RINGS (8422SHAKTI)
 
PARAMETER SPEC
Diameter 100
No of Rings 3
No of cylinder set 1
Size STD
GROOVE RING TYPE SPECIAL FEATURES BENEFITS
1st
CHROME KEYSTONE, KV1
Axial Height – 3.0 mm
Close Gap – 0.25 .. 0.45
  • Chrome ensures minimal wear & provides excellent scuff resistance.
  • KV1-high strength material for greater bending break & wear resistance.
  • Barrel Honing provides better sealing with high surface pressure.
  • Lower sharp design for minimal oil consumption
  • Phosphating coating increases oil retention property, reduces bedding in time and provides corrosion resistance
  • Longer Ring life
  • Lesser oil consumption
2nd
REVERSE TORSION
Axial Height – 2.0 mm
Close Gap – 0.30 .. 0.50
  • IKA MATERIAL ensures minimal wear & provides excellent scuff resistance.
  • Honed land
  • Reverse torsion Taper faced scraper for enhanced performance.
  • Phosphating coating increases oil retention property, reduces bedding in time and provides corrosion resistance
  • Lesser Oil Consumption
  • Long Ring Life
  • Better bedding in
3rd
Axial Height – 3.00 mm
End Gap - 0.25 – 0.50mm
  • CHROME PLATED FOR minimal wear
  • Exerts uniform wall pressure and excellent side sealing.
  • Effective side sealing due to specially designed expander large oil drainage area
  • Narrow lands
  • Longer life
  • Longer Ring life
  • Lesser oil consumption
 
MARUTI SUZUKI EECO
LINER KIT (03410MPLSD0000C4)
 
RING PACK X SECTION
KIT WITH HANDLE ON TOP
KIT CONTENTS EXISTING PART NUMBER QTY
Piston pin and circlip 03410PPC 4N
Ring 5572GTP 1 ENGINE SET
Liner 003910SFLIN 4N
TECHNICAL DATA PISTONS
Nominal Bore Diameter 71.00 mm
Top Land 12.0 mm
Ring Grooves 1.2 / 1.2 / 2.0
Compression Height 29.05
Total Height 48.05
Pin Diameter x Length 19X53.2
Piston Coating -
Piston Diameter 70.975
TECHNICAL DATA PISTON RINGS
Parameter Top Mid Oil
Dia 71.0 71.0 71.0
Axial 1.2 1.2 2.0
Coating Nitrided - Chrome
Closed Gap 0.15 .. 0.30 0.20.. 0.35 0.20 .. 0.70
Material STEEL IKA STEEL
Ring type RECTANGULAR, BEVEL SCRAPPER 3PIECE
No. of slots - - -
 
MARUTI SUZUKI EECO
LINER KIT (03410MPL)
 
TECHNICAL DATA LINER
COLLAR DIAMETER 74.5
TYPE SEMI FINISH
INSIDE DIAMETER 70.3
MATERIAL CAST IRON
OUTER DIAMETER 73.97
LENGTH 120.78
Special Features Their Advantages
S.No. Special Features Benefits to customer
1 Special Aluminum Silicon Alloy Lesser expansion hence can work with lesser clearance.
2 CNC machined Profile Controlled performance parameters for best results
3 Solid Section Above Pin boss Provides more strength to piston and hence longer life.
4 Optimized Inner Contour Piston can withstand heavy thermal loads .
5 As cast oil slots Lesser oil consumption
6 Thin Top Land Lesser dead volume & lesser emissions
 
Advanced Steel Nitrided Ring
  • Steel Nitrided rings for enhanced life and performance
  • Napier Second ring enhances scraping effect for low oil consumption
  • Cuts down Exhaust emissions
 
Superior Liner
  • Liner has superior material for better durability
  • The liner is Semi finished to facilitate reboring so as to maintain piston-liner clearance after installation
 
BAJAJ COMPACT RE 4STROKE
BLOCK KIT (02006GPLSD0000C1)
 
RING PACK X SECTION
TECHNICAL DATA PISTONS
Nominal Bore Diameter 63.50 mm
Top Land 5.23 mm
Ring Grooves 1.0 / 1.0 / 2.0
Compression Height 23.48
Total Height 38.48
Pin Diameter x Length 17 X 42.7
Piston Coating MOLY
Piston Diameter 63.464
TECHNICAL DATA PISTON RINGS
Parameter Top Mid Oil
Dia 63.5 63.5 63.5
Axial 1.0 1.0 2.0
Coating Chrome - Chrome
Closed Gap 0.10 .. 0.25 0.30.. 0.50 0.20 .. 0.70
Material STEEL KV1 STEEL
Ring type RECTANGULAR, BEVEL TAPER FACED 3PIECE
No. of slots - - -
TECHNICAL DATA BLOCK
INSIDE DIAMETER 63.5-0.020
TYPE FULLY FINISH
MATERIAL ALUMINIUM AND CI
TOTAL HEIGHT 107.1
NUMBER OF FINS 5
PAINT Silver
Special Features Their Advantages
S.No. Special Features Benefits to customer
1 Special Aluminum Silicon Alloy Lesser expansion hence can work with lesser clearance.
2 CNC machined Profile Controlled performance parameters for best results
3 Solid Section Above Pin boss Provides more strength to piston and hence longer life.
4 Optimized Inner Contour Piston can withstand heavy thermal loads .
5 Moly Coated Lesser oil consumption
6 Thin Top Land Lesser dead volume & lesser emissions
 
Advanced Steel Nitrided Ring
  • Steel Chrome rings for enhanced life and performance
  • Taper faced Second ring enhances scraping effect for low oil - consumption
  • Cuts down Exhaust emissions
 
Superior Block
  • Block has superior material for better durability
  • The liner is Fully finish with superior honing for low oil consumption.
  • Reduced weight for better mileage
BRAKE PADS
 
 
 
PART NUMBER FDB4692QS
APPLICATION SKODA SUPERB ‐ FRONT
LENGTH (MM) 155.00
THICKNESS (MM) 18.5
SHIM Y
INDICATOR ELECTRONIC
MASTER PACK 4 Sets
 
 
PART NUMBER FDB4761QS
APPLICATION DATSUN GO/ GO+
LENGTH (MM) 94.8
THICKNESS (MM) 15.3
SHIM N
INDICATOR MANUAL
MASTER PACK 4 Sets
 
 
PART NUMBER FDB4766QS
APPLICATION RENAULT KWID ‐ FRONT
LENGTH (MM) 101.00
THICKNESS (MM) 15.0
SHIM N
INDICATOR NA
MASTER PACK 4 Sets
 
 
PART NUMBER FDB4701QS
APPLICATION HYUNDAI CRETA‐ FRONT
LENGTH (MM) 133.0
THICKNESS (MM) 16.8
SHIM N
INDICATOR MANUAL
MASTER PACK 4 Sets
 
 
PART NUMBER FDB4747QS
APPLICATION TOYOTA INNOVA CRYSTA‐FRONT
LENGTH (MM) 144.8
THICKNESS (MM) 15.6
SHIM N
INDICATOR MANUAL
MASTER PACK 4 Sets
 

MARKET ACTIVITIES

Our new Engine Expertise van has been launched. The state of the art brand van showcases our products, manufacturing process and USPs to our Mechanic/Reborer/Retail partners. To have this van scheduled to your city/market, please call Mr. Manjeet Singh – 9983331509

 

TENT/ VAN CAMPAIGN

City: Mandi Gobindgarh, State: Punjab
City:  Hazaribagh, State: Jharkhand
City: Hyderabad, State: Andhra Pradesh
 

MARKET TRENDS & HIGHLIGHTS

Top 10 Scooters in September 2018

Key Highlights

The top two bestsellers, Honda Activa (Sept’18: 284,809 units) and the TVS Jupiter (September 2018: 90,738 units) have both reported a decline of 12 percent YoY and 3.03 percent YoY respectively.

Other high-selling scooters that did not make it to the list in September were Yamaha’s Ray series (14,192 units, down 7.87 percent YoY) and the Honda Grazia (13,001 units).

Industry experts forecast that the overall scooter demand will be able to restore its original momentum during Q3 and Q4 of this fiscal.

 

Top 10 Two Wheelers in September 2018

Key Highlights

The Hero Splendor tops the chart with wholesale dispatches of 285,508 units (up 15 percent YoY) in September. The company’s largest selling two-wheeler is followed by its second-best performing series, the Hero HF Deluxe range, which ranked second with dispatches of 201,240 units last month, up 15.16 percent YoY.

Bajaj Auto’s most affordable offering, the CT 100 family, is fourth in the Top 10-bestselling motorcycles list. The Bajaj CT reported dispatches of 89,387 units in September, up by 13.88 percent YoY.

The Platina, yet another Bajaj Auto commuter motorcycle brand, has registered impressive volumes in September. The company dealers received 67,450 units of its Bajaj Platina last month, which is a substantial YoY growth of 41.37 percent.

 

Top 10 LV's in September 2018

 

Top 5 UV's in September 2018

Key Highlights

The Indian car market is dominated by hatchbacks. Eight out of the 10 best sellers of September are hatchbacks. Maruti Suzuki's Swift emerged the top seller with sales of 22,228 units, an impressive 68 percent YoY growth (September 2017: 13193 units).

The Alto, once the undisputed king in terms of sales, comes second. It is still the best selling entry-level car but it seems to be losing its sheen. A total of 21,719 units were sold last month, a 9 percent YoY drop (September 2017: 23830 units).

The Maruti Suzuki Dzire comes in at third position with sales of 21,296 units. That's a 38 percent YoY drop (September 2017: 34305 units). The third-generation compact sedan had topped the bestsellers’ list last September. 

Meanwhile the Hyundai Elite i20 and Grand i10 come in at sixth and seventh positions respectively. The i20 moved up one rung over August with sales of 12,380 units, a 7 percent YoY growth (September 2017: 11,574 units). The Grand i10 dropped one position over the previous month. The model seems to be ageing. Its sales fell 20 percent YoY to 11,224 units (September 2017: 14099 units). 

 

Commercial Vehicles

Key Highlights

For April-January 2017-18, in the overall CV segment, Tata Motors with total sales of 329,986 units has recorded growth of 21.5 percent (April-February 16-17: 271,404 units). Commanding a 44.13 percent market share, the company remains the single largest player.

Mahindra & Mahindra, riding on its strong performance in the pick-up segment, remains the second largest player but it is now aggressively challenging the established players in the M&HCV segment to become the third largest player. Between April-February 2018, Mahindra Truck and Bus sold 191,307 units to register robust growth of 21 percent (April-February 2016-17: 1,57,840 units).

Ashok Leyland, the second largest M&HCV player, is the third largest player in the overall CV industry with a market share of 18.33 percent. The company sold 137,079 units in the same period, growing by 18 percent.

VE Commercial Vehicles, which is strong in the light and medium duty truck, is pushing hard in the medium and heavy commercial vehicle segment with several new product launches. During April-February 2017-18, the company sold 47,892 units with growth of 11 percent for a market share of 6.4 percent. VECV, which is currently selling close to 7,000 trucks per month, is operating at full capacities of 7,000-8,000 trucks per month, and given the higher sales the company is de-bottlenecking its products to further increase production.

 

CAMPAIGNS & CONTESTS

BE A CHAMPION 2018

Participants can send in entries for anyone who has done exemplary work in any of the below categories

  • Innovation ( Individual/Team who have applied innovation in development/process )
  • Automotive Enthusiast ( Individual/Team who are passionate about Rally/Automotive Sports )
  • Education ( Individual/Group who have done exemplary work in field of providing education to under privileged in society )
  • Sports (Other than Automobile) – ( Individuals who excel in non-automobile sports )
  • Social Work – ( Individual/Group who have done noticeable social work in any genre )
  • Environment Contribution – ( Individual/Group who have promoted or themselves contributed to environmental cause )
  • Champion in real Life ( Any Other Champion story )

Entries in the contest would be closed on 30th November 2018. Application can be filled in online mode as well as offline mode.

There are 3 Prizes of 3, 2 & 1 Lac along with consolation prizes.

All Terms & Conditions are mentioned online. Program is open till 30 Nov.

 
 

View our loyalty programs - www.retailstars.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
 
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
www.championparts.in
www.ferodo.in
+91-124-4786708

 

September 2018

 

September 2018
PRODUCT LAUNCH MARKETING PROGRAMS GLOBAL SNIPPETS
 

NEW PRODUCT INFORMATION

 
TATA CUMMINS 6BTEII
GASKET (PTS5313VSS)
 
S.NO. GASKET GASKET TYPE / MATERIAL
1 CYLINDER HEAD GASKET OE+ STEEL BACKBONE, FACING G4194
2 GASKET INTAKE MANIFOLD COVER NON ASBESTOS
3 GASKET AIR INTAKE CONNECTION NON ASBESTOS
4 GASKET CONNECTION NON ASBESTOS
5 GASKET TURBOCHARGER STEEL
6 GASKET EXHAUST MANIFOLD STEEL
7 ZEN PACKING NON ASBESTOS
8 GASKET OIL DRAIN TURBOCHARGER NON ASBESTOS
9 GASKET VALVE COVER SILICON RUBBER
10 RUBBER "O"RINGS RUBBER
11 RUBBER "O"RINGS RUBBER
12 RUBBER "O"RINGS RUBBER
13 RUBBER "O"RINGS RUBBER
14 RUBBER "O"RINGS RUBBER
15 RUBBER "O"RINGS RUBBER
16 RUBBER RINGS RUBBER
17 ISOLATOR NOISE NON ASBESTOS
18 BENJO WASHER COPPER
19 COPPER WASHER SEALING COPPER
20 SEAL INJECTOR NON ASBESTOS
21 VALVE STEM SEAL RUBBER + METAL
 
TATA CUMMINS 6BTEIII
OVERHAUL KIT (05816OHLSD0000C1)
 
PART CODE DESCRIPTION QUANTITY
PFS5328SBB FULL GASKET SET 1 SET
05816PPC PISTON, PIN AND CIRCLIP SET (MOLY COATED) 6 N
5328CKS PISTON RING SET (CKS) 1 SET
0088T00LIN LINER SET 6 N
H1275/7-0.25 MAIN BEARING SET INCLUDING FLANGE (0.25MM) 1 SET
53-4707-STD CAM SHAFT BUSH 1 N
71-5054/6-0.25 CON ROD BEARING SET (0.25MM) 1 SET
55-4706/6-SEMI CON ROD BUSH SET 1 SET
GPE5313 PLUG EXPANSION 1 N
GCV5313 COLLET VALVE 48 N
RENAULT NISSAN
RING SET (7231EUROSTEEL)
 
PARAMETER SPEC
Diameter 76
No of Rings 3
No of cylinder set 4
GROOVE RING TYPE SPECIAL FEATURES BENEFITS
1st
Steel Nitrided
Rectangular 2mm
End Gap: 0.15 - 0.30mm
  • NITRIDING ensures minimal wear & provides excellent scuff resistance.
  • STEEL-high strength material for greater bending break & wear resistance.
  • Barrel Honing provides better sealing with high surface pressure.
  • Low friction due to thin axial height
  • Longer Ring life
  • Lesser oil consumption
2nd
Scrapper ,2.0 mm
Close Gap: 0.20 - 0.40mm
  • -TAPER FACED for better scraping of oil.
  • Phosphating coating increases oil retention property, reduces bedding in time and provides corrosion resistance
  • Lesser Oil Consumption
  • Long Ring Life
3rd
Axial Height – 2.5 mm
End Gap - 0.20 – 0.40mm
  • STEEL material for greater bending ,break and wear resistance
  • GAS NITRIDED to ensure minimal wear
  • Exerts uniform wall pressure and excellent side sealing.
  • Effective side sealing due to specially designed expander large oil drainage area
  • Longer life
  • Longer Ring life
  • Lesser oil consumption
 
HYUNDAI I20 , VERNA (1.4l DIESEL)
RING SET (7222EUROSTEEL)
 
PARAMETER SPEC
Diameter 75
No of Rings 3
No of cylinder set 4
GROOVE RING TYPE SPECIAL FEATURES BENEFITS
1st
Steel Nitrided
Rectangular 1.75mm
End Gap: 0.2 - 0.40mm
  • NITRIDING ensures minimal wear & provides excellent scuff resistance.
  • STEEL-high strength material for greater bending break & wear resistance.
  • Barrel Honing provides better sealing with high surface pressure.
  • Low friction due to thin axial height
  • Longer Ring life
  • Lesser oil consumption
2nd
Positive Twist ,1.75 mm
Close Gap: 0.20 - 0.40mm
  • -TAPER FACED for better scraping of oil.
  • Phosphating coating increases oil retention property, reduces bedding in time and provides corrosion resistance
  • KV1 – high strength material for greater bending , break and wear resistance
  • Lesser Oil Consumption
  • Long Ring Life
3rd
Axial Height – 3.0 mm End Gap -0.20 – 0.40mm
  • STEEL material for greater bending ,break and wear resistance
  • GAS NITRIDED to ensure minimal wear
  • Exerts uniform wall pressure and excellent side sealing.
  • Effective side sealing due to specially designed expander large oil drainage area
  • Longer life
  • Longer Ring life
  • Lesser oil consumption
 

MARKETING PROGRAMS

Loyalty Program for Retailer
(Braking & Service)
 
Loyalty Program for Reborer
(BIW Piston Assemblies)
 
Loyalty Program for Reborer
(Engine Bearing & Commercial Engine Valve)
 

GLOBAL SNIPPETS

MOOG® Launches ‘Leader of the Pack’ Competition for NASCAR® Fans

MOOG®, the “Official Steering and Suspension Partner of NASCAR®” and leading brand from Federal-Mogul Motorparts, has opened its MOOG Leader of the Pack competition for NASCAR® enthusiasts.

Each week during the Monster Energy NASCAR Cup Series™, fans are encouraged to select their favourite driver, and depending upon where that driver finishes, will earn points for that driver’s performance (the better the driver does, the more points earned).  Point totals are cumulative, and at the end of the competition, the fan with the most points out of 500 will be eligible to win a trip for two to the race of their choice during the 2019 NASCAR® season (including hotel, airfare, two Hot/VIP passes, two Grandstand tickets, and a US$500 gift card).  Other great prizes will also be awarded to 50 runners-up and at random during registration and throughout the competition.
“After the success of last year’s contest, MOOG is thrilled to be able to bring back this competition in conjunction with our longstanding NASCAR® relationship, and to really give something back to both our fans and NASCAR® fans,” said Tim Nelson, Director, Motorsports, Federal-Mogul Motorparts.  “Participants will be extra motivated to follow their favourite drivers throughout the entirety of the NASCAR® Playoffs season, and will also have the chance to win great prizes from MOOG.”

Registration is easy: visit www.moogleader.com and follow the instructions.  Starting on September 10, 2018, registrants will be able to make their first driver selection, and may continue to do so every week through November 18, 2018.  Throughout the four-week early registration period, 200 registrants will be chosen at random to win an exclusive MOOG prize pack, including a MOOG Leader of the Pack t-shirt, 52nd Championship poster, mechanics gloves, and a decal.  An additional 100 people will be randomly chosen to win other MOOG-branded gear for weekly participation.

 

Federal-Mogul Powertrain Launches New Electrification Strategy for Commercial Vehicles

Federal-Mogul Powertrain is launching its new electrification strategy for medium- and heavy-duty vehicles at this year's IAA Commercial Vehicles show in Hanover, Germany (19 – 27 September, Hall 13, Stand C30). Developed by its Controlled Power Technologies product group, the company is displaying a cost-effective, fully scalable, modular approach that can be optimized for the unique demands of each commercial vehicle segment and application. The technology portfolio can be individually customized and integrated to meet the specific needs of engine manufacturers to economically meet their emission and efficiency targets.

 

One of the key questions that motivates us at Federal-Mogul is how we can improve fuel economy and CO2 emissions in commercial vehicles by harvesting waste energy, including both vehicle kinetic energy that is lost during braking and exhaust gas energy. Our solution must include how to then store it efficiently and return it to do useful work," said Gian Maria Olivetti, Chief Technology Officer, Federal-Mogul Powertrain. "Electrification can provide an attractive answer, but for medium- and heavy-duty commercial vehicles the most efficient way to achieve this is very different to that for passenger cars, so attempting to adapt traction-focused technologies can lead to solutions that are far from ideal," said Nick Pascoe, Managing Director of Federal-Mogul Controlled Power Ltd.

 

Diesel engines are highly efficient in a steady state but are substantially less efficient during transients (changes in torque request). Instead of trying to replace or supplement the internal combustion engine (ICE) with an electric traction motor, Federal-Mogul Powertrain engineers are using electrification to further enhance the efficiency of the ICE, both during steady-state operation and particularly to improve the fuel-economy and emissions impact of challenging transient conditions.

In the new approach, the engineering team around Nick Pascoe is supplementing kinetic energy recovered through an engine or driveline-mounted generator by electricity generated from a carefully-controlled exhaust-driven generator. Energy is then returned either through an electric motor supporting the engine/driveline or by electric supercharging.

Independently-conducted tests have shown that a highly-responsive Federal-Mogul motor-generator as small as 12 kW applied to the engine or driveline can enable fuel savings of up to 8 percent on a full-size bus by recuperating energy as the vehicle decelerates and boosting the engine's torque as it accelerates. The machine's compact size, fully integrated electronics and efficient thermal management, combined with increasingly standardized control protocols and a wide range of design and simulation tools, makes integration of the motor-generator fast and efficient, even on existing powertrain designs.

Federal-Mogul's engineers are seeing further opportunities for waste energy recovery by electrification of the air-loop system. While turbocharging recovers some of the 20-30 percent of the fuel's energy that leaves the engine in the exhaust gas, there is still more to be captured and returned. "Simple, cost-effective exhaust gas energy recovery requires a control system that avoids harvesting events that are harmful to the performance of the base engine or damaging to the generator itself or to the after treatment system.

 
 

View our loyalty programs - www.retailstars.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
 
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
www.championparts.in
www.ferodo.in
+91-124-4786707
customerserviceindia@fmmotorparts.com

 

August 2018

 

August 2018
PRODUCT LAUNCH MEDIA COVERAGE GLOBAL SNIPPETS
 

NEW PRODUCT INFORMATION

GREAVES GL 435 BS IV
PISTON SET (01165MPO)
 
       
 
Piston Dimensions (mm)
Bore Diameter 86
Piston Diameter 86
Top Land Height 9
Piston Liner Clearance Cold Clearance 0.045
Compression Height 44 ± 0.05
Total Height 72
Pin Diameter x Length 20 / 8 X 67.7
Pin Bore Clearence 0.007
Coating AV-13D Graphite Coating
Groove Height (1st, 2nd and oil) 2.09, 2.06, 3.03
Material CSA18
OE Part Number E10G050005 & E10G050005
Pin Hole Offset Nil
Surface Treatment Phosphated
Pin Bore Feature St Bore
Matching Ring 2033TKIDCES
 
Features and benefits:
  • High Durability Aluminium Silicon Alloy
  • Advanced Graphite coating
  • With top ring as semi inlaid ring and narrow land oil ring
HYUNDAI SANTRO ERLX 1.1L
LINER KIT (03210MPL)
 
     
 
Kit Contents Existing Part Number
Piston Pin And Circlip 03210PPN
Ring 5550GTX
Liner 0039700SFLIN
 
Technical Details Pistons
Nominal Bore Diameter 67.00
Piston Diameter 66.985
Top Land 4.8
Ring Grooves 1.2 / 1.2 / 2.0
Compression Height 24.6
Total Height 48.55
Pin Diameter x Length 17 x 46.3
Piston Coating -
 
Technical Data Piston Rings
Parameter Top Mid Oil
Dia 67.0
Axial 1.2 1.2 2.0
Coating Nitrided - Nitrided
Close Gap 0.15-0.30 0.20-0.35 0.15-0.70
Material Steel Std Steel
Ring Type Rectangular, Bevel Napier 3POR
No. of Slots - - -
 
Special Features and their Advantages
S. No. Special Features Benefits to Customer
1 Special aluminium silicon alloy Lesser expansion hencce can work with lesser clearance.
2 CNC Milled Bowl Helps in complete combustion and hence better fuel average
3 Solid section above pin boss Provides more strength to piston and hence longer life
4 Optimised inner contour Piston can withstand heavy thermal loads
5 As cast oil slots Lesser oil consumption
6 Thin top land Lesser dead volume & lesser emissions
7 Pin bore relief For improved oil lubrication
TVS CENTRA
ENGINE VALVE (GV1034)
 
 
Size Std
Cyl. Bore Dia. 51.0 mm, 1 cyl. set
Master Pack 120
Intermediate 10
 
PARAMETER INLET VALVE EXHAUST VALVE
Material 21-4N EN-52
Head Diameter 25 20.5
Stem Diameter 4.965 4.95
Coating Nitriding Nitriding
Seat Angle 45deg 45deg
Length 68.5 67.6
Contents 1 each 1 each
HONDA ACTIVA 100CC
GASKET (PFS1940S)
 
S.NO. GASKET GASKET TYPE / MATERIAL COLOUR
1 CYLINDER HEAD GASKET SS 304 WITH AL COATING SILVERY WHITE
2 GASKET CYLINDER BASE NON ASBESTOS YELLOW/GREEN
3 SILENCER EXHAUST PIPE RING SS 304 + NON ASBESTOS -
4 GASKET CARB. INSULATOR - B NON ASBESTOS YELLOW/GREEN
5 GASKET MISSION CASE NON ASBESTOS YELLOW/GREEN
6 GASKET CRANK CASE NON ASBESTOS YELLOW/GREEN
7 GASKET L COVER NON ASBESTOS YELLOW/GREEN
8 AIR FEED PIPE GASKET GRAPHITE COMPOSITE GREY BLACK
SUZUKI ACCESS
ENGINE VALVE (GV1032)
 
 
Size Std
Cyl. Bore Dia. 53.5 mm, 1 cyl. set
Master Pack 120
Intermediate 10
 
PARAMETER INLET VALVE EXHAUST VALVE
Material EN-52 21-4N
Head Diameter 25 22
Stem Diameter 4.987 4.967
Coating Nitriding Nitriding
Seat Angle 45DEG15MIN 45DEG15MIN
Length 72.85 72
Contents 1 each 1 each
HONDA ACTIVA 110CC
GASKET (PFS1982S)
 
S.NO. GASKET GASKET TYPE / MATERIAL COLOUR
1 CYLINDER HEAD GASKET SS 304 WITH AL COATING SILVERY WHITE
2 GASKET CYLINDER BASE NON ASBESTOS YELLOW/GREEN
3 SILENCER EXHAUST PIPE RING SS 304 + NON ASBESTOS -
4 GASKET CARB. INSULATOR - B NON ASBESTOS YELLOW/GREEN
5 GASKET MISSION CASE NON ASBESTOS YELLOW/GREEN
6 GASKET CRANK CASE NON ASBESTOS YELLOW/GREEN
7 GASKET L COVER NON ASBESTOS YELLOW/GREEN
8 AIR FEED PIPE GASKET GRAPHITE COMPOSITE GREY BLACK
9 GASKET CARB. INSULATOR - A NON ASBESTOS YELLOW/GREEN
10 GASKET TENSIONER TIN PLATE SILVER WHITE
11 FLANGE GASKET GRAPHITE CEMJO GREY BLACK
 

MEDIA COVERAGE

 
 
 

GLOBAL SNIPPETS

Federal-Mogul Motorparts Presents New Support Program and Champion® Expansion at Automechanika Frankfurt 2018

Federal-Mogul Motorparts announced its presence at Automechanika Frankfurt 2018 on the 11th-15th of September. During the show, the company will present exciting new products and innovative projects from across its diverse range of widely regarded, quality aftermarket brands.

Garage Gurus: The launch of Federal-Mogul Motorparts’ comprehensive support program comprised of four pillars: Onsite, Online, On-Call and On-the-Go.

Champion®: The brand’s exciting product extension to include batteries, braking and lighting.

MOOG®: MOOG will be launching a differentiation program on steering and suspension parts which will bring mechanical benefits, enhanced manufacturing footprint and hybrid core technology, all highlighted by new packaging.

Ferodo®: the power of the performance of the brand is showcased with its OE pedigree, and also features first-to-market products for popular applications.

Jurid®: the technical knowledge of the brand is demonstrated through its directional brake pads; new packaging exhibits the brand’s attention to details.

Engine & Sealing: Introduction of the latest technologies in the aftermarket and the extension to the Payen® Pro-fit range.

Beru®: The launch of new Iridium spark plugs will be accompanied by useful tools and sensors, as well as a new, more responsive website.

As in the past, the booth will feature interactive exhibits and demonstrations, while members of the Federal-Mogul Motorparts senior management team will be available for interviews.

 

New Sweepstakes from Beck/Arnley® Encourages Consumers to 'Check with Beck'

Contest asks drivers to submit photos of their foreign nameplate vehicles for a chance to win a weekend getaway and other weekly prizes.

Beck/Arnley® has launched the Check with Beck Sweepstakes, where drivers can be entered to win a weekend getaway just by showing off their foreign nameplate vehicles. Beck/Arnley, The Foreign Nameplate Specialists, is a leading brand from Federal-Mogul Motorparts.

Beginning now through September 23, 2018, consumers are encouraged to take a photo of their foreign nameplate vehicle and then share it at www.BeckPromo.com. Entrants should include a brief description indicating why they are passionate about their vehicle and if they have used Beck/Arnley parts for any repairs. Approved entries will be displayed on the website, and each week, a winner will be selected at random to receive a US$500 gift card. All entrants will also be entered for a chance to win the grand prize of a weekend getaway for two to their choice of four destinations: Las Vegas, Nevada; Napa Valley in California; New York City; or Nashville, Tennessee.

Beck/Arnley recently launched an updated look for the 104-year old brand, including a new logo and a refreshed website to provide consumers with an easier method of identifying the products they need. Featuring an enhanced part finder that provides users with a more robust look-up system, making it easier to find the right part or fluid for one's needs, the site also debuts a modern look-and-feel.

 
 

View our loyalty programs - www.retailstars.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
 
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
www.championparts.in
www.ferodo.in
+91-124-4786707
customerserviceindia@fmmotorparts.com

 

July 2018

 

July 2018
PRODUCT LAUNCH MARKETING INITIATIVE GLOBAL SNIPPETS
 

NEW PRODUCT INFORMATION

MAHINDRA MAXXIMO DIESEL
LINER KIT (04337MPL)
 
Kit Contents Existing Part Number
Piston pin and circlip 4337PPC
Ring 5777EUROSTEEL
Liner 009500SF
       
 
Technical Data Specification
Nominal Bore Diameter 83.00 mm
Piston Diameter 82.925 mm
Top Layer 8.2 mm
Piston Liner Clearance 0.075mm
Compression Height 43.75 mm
Total Height 62.75 mm
Pin Diameter x Length 30.00 mm x 65.7 mm
Piston Coating Advanced Moly Coating
 
Technical Data Piston Rings
Parameter Top Mid Oil
Dia 83.00
Axial 2.0 1.5 2.0
Coating Chrome - Nitrided
Closed Gap 0.25-0.40 0.30-0.55 0.20-0.40
Material KV1 IKA STEEL NITRIDED
Ring Type KEYSTONE REVERSE TORSION STEEL
No. of slots - - 26
 
S. No. SPECIAL FEATURES BENEFITS TO CUSTOMERS
1 SPECIAL HIGH STRENGTH ALLOY Provides optimum strength to piston and Lesser expansion
2 CNC TURNED RE-ENTRANT CAVITY Better fuel combustion and lesser emissions
2 MOLY COATED SKIRT Provides wear and scuff resistance
3 PHOSPHATED ALL OVER Faster bedding in and longer shelf life
3 THIN WALL CROSS SECTION Lesser expansion hence piston can work at lesser clearance
4 LIGHT WEIGHT DESIGN Lesser fuel consumption
5 THIN TOP LAND Helps in reducing emissions
6 FOUR VALVE POCKETS Better combustion and reduces emissions
Suzuki Hayate EP
PISTON KIT (01027GMP) (WITH RING 2220GTX)
 
     
 
TECHNICAL DATA PISTONS
CYL. BORE DIA.(Nominal) 51.0 mm
COMPRESSION.HT. 17.35 mm
Total Height 34.05 mm
Piston Liner Clearance 0.030 mm (Approx)
PIN OD x ID x LENGTH 12.0 x 8.0 x 33.50
Top Ring Groove(width) 0.81 mm
2nd Ring Groove(width) 0.81 mm
Oil Ring Groove(width) 1.51 mm
 
TECHNICAL DATA, RING SET NO. 2220GTX
Groove Ring Feature Ax. Ht. (mm) End Gap (mm)
1st Comp Steel GasNitrided 0.8 0.10-0.25
2nd Groove KV1, Taper faced,Phos. 0.8 0.10-0.25
3rd Oil 3POR, Chrome Steel siderails 1.5 0.10-0.60
 
Features and benefits:
  • Machined Crown and As Cast Valve Pocket withspecial aluminum alloy for strength
  • Thin ring grooves for better sealing of gases & oil scrapping
  • Oil holes in oil ring groove for lower oil consumption
  • Slipper Design for Better oil drainage & hence lesser oil consumption and Lesser weight & hence better fuel average
TVS KING THREE WHEELER
BLOCK KIT (01035GPL)
 
     
 
Technical Details (Ring Set No. 2291GTP)
Parameter Ring 1st Ring 2nd Ring 3rd
MATERIAL STEEL KV1 STEEL
COATING NITRIDED PHOSP. CHROME
AXIAL HEIGHT 0.80 0.80 1.50
RADIAL LENGTH 3.00 3.00 2.70
END GAP .10 - .25 .30 - .50 .20 - .70
RING TYPE ST. FACE RECT. BARRELED TAPER FACE RECT. 3 POR WITH COIL SPRING
 
Technical Details (Piston Part No. 01033PPC)
PARAMETER SPECIFICATION (MM)
Nominal Bore Dia 62.0
Comp. Height 21.80
Total Height 39.90
Pin OD/ID*Length Ø15/10x45
Coating Al-Si Alloy of Piston with Moly Coating
Crown Finish Cast with Centre Riser Machined
 
Technical Details (Cylinder Block )
PARAMETER SPECIFICATION
Material Cast Iron
Coating As Cast
Total Height 111.40
Comp. Height 92.00
Bore Dia (mm) 62.00
Cooling Type Air Cooled
 
SPECIAL FEATURES ADVANTAGES BENEFITS TO CUSTOMERS
Al-Si Alloy of Piston with Moly Coating Lesser expansion, more durable at high temperatures, Act as anti scuffing agent & reduce friction during engine start and prevent skirt scuffing Prolonged Piston life, reduced operating friction
1st St. face Rect. Barreled Consistent lubrication of the piston ring and cylinder wall. Reduces oil film breakage. Provides wedge effect to optimize oil distribution. Lesser consumption of Lubrication Oil. Better Engine Life.
Air Cooled Block Reduced weight, Lesser maintenance, Better cooling for engine to run smoothly. Better performance and fuel efficiency
HERO SUPER SPLENDOR
BLOCK KIT (01016MPLS)
 
     
 
Technical Details (Ring Set No. 2263GTX)
Parameter Ring 1st Ring 2nd Ring 3rd
MATERIAL STEEL KV1 STEEL
COATING NITRIDED PHOSP. CHROME
AXIAL HEIGHT 0.80 0.80 1.50
RADIAL LENGTH 3.00 3.00 2.70
END GAP .10 - .25 .30 - .50 .20 - .70
RING TYPE ST. FACE RECT. BARRELED TAPER FACE RECT. 3 POR WITH COIL SPRING
 
Technical Details (Piston Part No. 01016PPC)
PARAMETER SPECIFICATION (MM)
Nominal Bore Dia 52.388
Comp. Height 19.80
Total Height 38.80
Pin OD/ID*Length Ø13/9.0x38.6
Coating No Coating
Crown CNC Machined Crown and Valve Pocket
 
Technical Details (Cylinder Block )
PARAMETER SPECIFICATION
Material Al Alloy
Coating Silver
Total Height 99.70
Comp. Height 71.60
Bore Dia (mm) 52.40
Cooling Type Air Cooled
 
SPECIAL FEATURES ADVANTAGES BENEFITS TO CUSTOMERS
Al-Si Alloy of Piston with Moly Coating Lesser expansion, more durable at high temperatures, Act as anti scuffing agent & reduce friction during engine start and prevent skirt scuffing Prolonged Piston life, reduced operating friction
1st St. face Rect. Barreled Consistent lubrication of the piston ring and cylinder wall. Reduces oil film breakage. Provides wedge effect to optimize oil distribution. Lesser consumption of Lubrication Oil. Better Engine Life.
Air Cooled Block Reduced weight, Lesser maintenance, Better cooling for engine to run smoothly. Better performance and fuel efficiency
HONDA SHINE
BLOCK KIT (01018MPLS)
 
     
 
Technical Details (Ring Set No. 2273GTX)
Parameter Ring 1st Ring 2nd Ring 3rd
MATERIAL STEEL KV1 STEEL
COATING NITRIDED PHOSP. CHROME
AXIAL HEIGHT 0.80 0.80 1.50
RADIAL LENGTH 3.00 3.00 2.70
END GAP .10 - .25 .30 - .50 .20 - .70
RING TYPE ST. FACE RECT. BARRELED TAPER FACE RECT. 3 POR WITH COIL SPRING
 
Technical Details (Piston Part No. 01018PPC)
PARAMETER SPECIFICATION (MM)
Nominal Bore Dia 52.388
Comp. Height 20.40
Total Height 38.40
Pin OD/ID*Length Ø13/9.0 x 38.4
Coating Al-Si Alloy of Piston with Tin Coating
Crown Piston Crown Finish Machined, Valve as cast
 
Technical Details (Cylinder Block )
PARAMETER SPECIFICATION
Material Al Alloy
Coating Silver
Total Height 90.20
Comp. Height 62.30
Bore Dia (mm) 52.40
Cooling Type Air Cooled
 
SPECIAL FEATURES ADVANTAGES BENEFITS TO CUSTOMERS
Al-Si Alloy with CNC Machined Crown and Valve Pocket. Tin Coating Lesser expansion, more durable at high temperatures, Act as anti scuffing agent & reduce friction during engine start and prevent skirt scuffing. Accurate clearance volume for better combustion. CNC Machined Crown and Valve Pocket. Provides initial lubrication. Prolonged Piston life, reduced operating friction
1st Ring Straight face Rect. Barrelled Consistent lubrication of the piston ring and cylinder wall. Reduces oil film breakage. Provides wedge effect to optimize oil distribution. Lesser consumption of Lubrication Oil. Better Engine Life.
Air Cooled Block Reduced weight, Lesser maintenance, Better cooling for engine to run smoothly. Better performance and fuel efficiency
 

MARKETING INITIATIVE

Be A Champion Program

Overview
  • Based on the similar platform of last year, 2018 Be A Champion edition rolled out
  • Inviting entries from pan India through online/offline Mode

 

 

 

Categories selected for contest participation
  • Social contribution – Contributed to a social cause: The best way to find yourself is to lose yourself in service of other
  • Empowering women: Women are the real Champion who can change the society
  • Contribution to environment: The Earth is what we all have in common
  • Sports Achiever/Enthusiast: Champions are not born, they are made
  • Racing- Auto Enthusiast/ Bike/Car Rally Participant: A winner is just a loose who tried one more time
  • Champion in real life: A Champion is a Motivation beyond Winning and Success
Prize Details: Win prizes Upto 3 lacs.

For more details please visit : www.fmbandhan.in

 

Best Display Contest 2

 

 

GLOBAL SNIPPETS

Chongqing Hosts FMOS Lean Expert Training

The Federal-Mogul Motorparts Braking facility in Chongqing, China, hosted the final two weeks of the four-week intensive 2018 Lean Expert Development Program. Delegates covered subjects ranging from Built-in-Quality, Error Proofing, Pull Systems, TPM (Total Productive Maintenance), as well as others that are part of the Federal-Mogul Operating System (FMOS).

The training involved a combination of classroom training, simulations and shop-floor activities, intended to teach the necessary theoretical knowledge and practical skills to successfully deploy FMOS.

Federal-Mogul Motorparts Receives ACPN Content Excellence Award for MOOG® Hub Assemblies Catalog

Federal-Mogul Motorparts received the Automotive Content Professionals Network (ACPN) Content Excellence Award during the 2018 Knowledge Exchange Conference in Fort Worth, Texas, in mid-April. The company’s content team was recognized for achieving the highest score in the ACES (Aftermarket Catalog Enhanced Standard) and PIES (Product Information Exchange Standard) digital assets category for the latest MOOG® Hub Assemblies catalog.

ACPN is a community of the Auto Care Association dedicated to helping manufacturers and their channel partners sell more products, reduce costs and increase efficiency through accurate catalogs, efficient production processes and new technology.

The new MOOG catalog’s ACES and PIES xml files achieved the highest score in the medium-sized catalog category based on eight criteria within each of three application-count brackets. High-quality, timely product content plays a vital role in helping aftermarket channel partners identify and sell the correct parts for each vehicle and repair occasion. Motorparts’ content team has received multiple ACPN Content Excellence awards over the past several years.

“Customers rely on us not only for our industry-leading brands, products and programs, but also for world-class product information and other eCatalog solutions that help support their success at the point of sale,” said Brent Berman, director of training and consumer experience, Federal-Mogul Motorparts. “I am proud of our team for once again delivering on this important commitment to our channel partners.”

 
 

View our loyalty programs - www.retailstars.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
 
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
www.championparts.in
www.ferodo.in
+91-124-4786707
customerserviceindia@fmmotorparts.com

 

June 2018

 

June 2018
PRODUCT LAUNCH MEDIA COVERAGE GLOBAL SNIPPETS
 

NEW PRODUCT INFORMATION

TATA ACE DIESEL
LINER KIT (04333SPL)
 
Kit Contents Existing Part Number
Piston pin and circlip 04333PPC (Moly Coated)
Ring 5764EUROSTEEL
Liner 09920LIN
     
 
Technical Data Specification
No of cylinder 2
Nominal Bore Diameter 75.00 mm
Piston Diameter 74.945 mm
Top Layer 12.0 mm
Piston Liner Clearance 0.055mm
Compression Height 42.95 mm
Total Height 69.0 mm
Pin Diameter x Length 23.00 mm x58 mm
 
Technical Data Piston Rings
Parameter Top Mid Oil
Dia 75.00
Axial 2.0 2.0 3.0
Coating Nitrided - Nitrided
Closed Gap 0.15-0.30 0.15-0.30 0.15-0.30
Material Steel IKA Steel
Ring Type BARREL TAPER FACE Narrow Land
No. of slots - - 28
 
S. No. SPECIAL FEATURES BENEFITS TO CUSTOMERS
1 SPECIAL HIGH STRENGTH ALLOY Provides optimum strength to piston and Lesser expansion
2 MOLY COATED SKIRT Provides wear and scuff resistance
3 THIN WALL CROSS SECTION Lesser expansion hence piston can work at lesser clearance
4 LIGHT WEIGHT DESIGN Lesser fuel consumption
5 THIN TOP LAND Helps in reducing emissions
6 PHOSPHATED For faster bedding in and initial protection
7 TOP RING STEEL NITRIDED Provides wear and scuff resistance
8 OIL RING STEEL NITRIDED Provides wear and scuff resistance
9 NARROW LAND OIL RING Lesser Lube oil consumption
10 LOW GAP END RINGS Low end gap rings specially made for mechanics preference
11 SUPERIOR LINER Better durability
12 SEMI FINISH LINER To facilitate reboring so as to maintain piston-liner clearance after installation
TATA 407/709/1109 EURO II / III
GASKET (PCH68713RCS010000E)
 
     
 
Layer Material Thickness(mm) Bore Diameter(mm) Compressed Thickness(mm)
Top Rubber Coated Steel 0.28 97 1.6
Middle Victograph 1.05
Bottom Rubber Coated Steel 0.28
 
Features and benefits:
  • Very unique construction which gives advantage of both Fibre gasket & MLS gasket
  • Top & Bottom layer in Rubber Coated Steel gives higher thermal stability with micro sealing capability while Middle layer gives the better conformability to the cylinder head & Block conditions post OE Fitment usage
KIRLOSKAR R1040
RING SET (8526TKITCES)
 
PARAMETER SPEC
Size Std.
Cyl. Bore Dia 105.0 mm
SET PACKING 1 Cycle
GROOVE RING TYPE SPECIAL FEATURES BENEFITS
1st
CHROME KEYSTONE, KV1
Axial Height – 3.0 mm
Close Gap – 0.25 .. 0.45
  • Chrome ensures minimal wear & provides excellent scuff resistance.
  • KV1 high strength material for greater bending break & wear resistance.
  • Barrel Honing provides better sealing with high surface pressure
  • Lower sharp design for minimal oil consumption
  • Phosphating coating increases oil retention property, reduces bedding in time and provides corrosion resistance
  • Longer Ring life
  • Lesser oil consumption -Lesser oil consumption
2nd
CHRONE REVERSE TORSIO
Axial Height – 2.0 mm
Close Gap – 0.40 - 0.60
  • Chrome ensures minimal wear & provides excellent scuff resistance.
  • IKA material
  • Reverse torsion Taper faced scraper for enhanced performance
  • Phosphating coating increases oil retention property, reduces bedding in time and provides corrosion resistance
  • Lesser Oil Consumption
  • Long ring life
  • Better bedding in
3rd
Axial Height – 3.0 mm
End Gap -0.25 – 0.50mm
  • CHROME PLATED FOR minimal wear
  • Exerts uniform wall pressure and excellent side sealing
  • Effective side sealing due to specially designed expander large oil drainage area
  • Narrow lands
  • Longer Ring life
  • Longer life
  • Lesser oil consumption
Maruti swift diesel and other 75PS engines
PISTON KIT (03458MPL) (WITH RING 5763CKS)
 
       
 
TECHNICAL DATA PISTONS
Nominal Bore Diameter 69.600 mm
Piston Diameter 69.546 mm
Top Land 7.50 mm
Piston Liner Clearance 0.054mm
Compression Height 40.43 mm
Total Height 62.43 mm
Pin Diameter x Length 23.00 mm x56.8 mm
Pin bore clearance 8-18 micron
 
TECHNICAL DATA PISTONS
Parameter Top Mid Oil
Dia 69.6
Axial 1.5 1.5 2
Coating CKS - Chrome
Closed Gap 0.18-0.30 1.0-1.5 0.25-0.50
Material KV4 F14 STD
Ring Type SEMI INLAY TAPER FACE LKZ
No. of Slots - - 48
 
Special Features & Their Advantage
S. No. SPECIAL FEATURES BENEFITS TO CUSTOMERS
1 SPECIAL HIGH STRENGTH ALLOY Provides optimum strength to piston and Lesser expansion
2 CNC TURNED RE-ENTRANT CAVIT Better fuel combustion and lesser emissions
3 MOLY COATED SKIRT Provides wear and scuff resistance
4 PIN HOLE SIDE RELIEF Better oil drainage & hence lesser oil consumption. Lesser weight & hence better fuel average
5 THIN WALL CROSS SECTION Lesser expansion hence piston can work at lesser clearance
6 LIGHT WEIGHT DESIGN Lesser fuel consumption
7 SPECIAL HIGH STRENGTH ALLOY Reduces the stresses on gudgeon pin boss
8 LUG TYPE DESIGN Better guidance to piston movement and hence lesser noise
9 THIN TOP LAND Helps in reducing emissions
10 COPPER COATED CIRCLIPS Improves engine life
11 FOUR VALVE POCKETS Better combustion and reduces emissions
SWARAJ MAZDA DIESEL
PISTON KIT (04476PPC)
 
     
 
PARAMETER SPEC
Size Std.
Cyl. Bore Dia 100 mm
Cyl. Set 4
 
TECHNICAL DATA PISTONS
Nominal Bore Diameter 100
Piston Diameter 99.85 – 99.97
Top Land Height 15.9
Compression Height 58.0
Total Height 105.0 mm
Pin Diameter x Length 34 x 82.3
Groove height 1st / 2nd and oil 2.5/2.0/4.5
Piston Coating -
OE Part Number LP4023200
Pin Hole Offset 0.5
Surface Treatment -
Matching Ring 6885TKTCES
 
Special Features & Their Advantage
S. No. SPECIAL FEATURES BENEFITS TO CUSTOMERS
1 Special Aluminum Silicon Alloy Lesser expansion hence can work with lesser clearance.
2 CNC Milled Bowl Helps in complete combustion and hence better fuel average
3 Solid Section Above Pin boss Provides more strength to piston and hence longer life
4 Optimized Inner Contour Piston can withstand heavy thermal loads
5 As cast oil slots Lesser oil consumption
6 Cast Iron Ring Carrier Longer Life of Piston and piston rings
7 Steel Strut In Cavity Lesser expansion hence can work with lesser clearance
8 J Groove For effective oil drainage
 

MEDIA COVERAGE

Be A Champion Program

Overview
  • Based on the similar platform of last year, 2018 Be A Champion edition rolled out
  • Inviting entries from pan India through online/offline Mode

 

 

 

Categories selected for contest participation
  • Social contribution – Contributed to a social cause: The best way to find yourself is to lose yourself in service of other
  • Empowering women: Women are the real Champion who can change the society
  • Contribution to environment: The Earth is what we all have in common
  • Sports Achiever/Enthusiast: Champions are not born, they are made
  • Racing- Auto Enthusiast/ Bike/Car Rally Participant: A winner is just a loose who tried one more time
  • Champion in real life: A Champion is a Motivation beyond Winning and Success
Prize Details: Win prizes Upto 3 lacs.

for more details please visit : www.fmbandhan.in and call : +91-124-4786708

 

GLOBAL SNIPPETS

Federal-Mogul Powertrain Technologies Featured on All 13 International Engine of the Year Award-Winning Engines

SOUTHFIELD, Michigan, June 13, 2018...Leading engine technologies from Federal-Mogul Powertrain are featured on all of the 2018 International Engine of the Year Awards winners. Again, Federal-Mogul Powertrain’s broad range of advanced engine components are found on the winners of all 13 award categories, each of which use one or more of the company’s pistons, rings, liners, bearings, valve seats and valve guides, seals and gaskets, valvetrain and system protection products.

The panel of judges for the 2018 International Engine of the Year Awards comprises 68 automotive journalists from 32 countries, who together evaluated engine designs that blended high-end performance with advanced technologies designed to reduce emissions and substantially improve fuel economy.

Federal-Mogul Powertrain is committed to developing innovative products that help our customers to enhance overall vehicle efficiency and performance,” said Gian Maria Olivetti, Chief Technology Officer, Federal-Mogul Powertrain. “We are pleased to once again support all winners of the 2018 International Engine of the Year Awards with our industry-leading powertrain technologies.


Federal-Mogul Powertrain Launches New Piston Ring Technology for Commercial Vehicles

Burscheid, Germany, May 29, 2018… Federal-Mogul Powertrain has developed a new piston ring for use in commercial vehicle diesel engines that enhances gas sealing capability by stabilizing ring dynamic motion and homogenizing oil film. The running surface profile of the new eLineTM rings for use in the 2nd groove has been designed to distribute oil more evenly around the cylinder bores and to modify the running face area for reduced gas pressure force. This results in enhanced engine efficiency, increased robustness and lower emissions. Bench tests with eLine in different diesel engines have shown a significant reduction in blow-by of up to 20 percent, which converts directly into either an increase in mean effective pressure or a decrease in fuel consumption.

eLine is the first commercial vehicle piston ring technology that distributes oil circumferentially in a consistent layer,” explained Dr. Steffen Hoppe, Director, Technology, Rings & Liners, Federal-Mogul Powertrain. “The design compensates for localized surplus oil drops, protects against local oil film breakdown, supports low oil viscosity strategies, improves the sealing of combustion gases and reduces wear. The specific running surface profile has also been designed to prevent radial ring instabilities, which are becoming more common due to the industry trend for increased peak combustion pressures.

Rings used in the 2nd groove of commercial vehicle engines are predominantly designed with a tapered running face profile. These can struggle to maintain a homogenous oil film in sub-optimal conditions, such as bore distortion or oil supply issues. The tapered profile also provides a comparably large running face area, which can result in radial ring instability when pressure between the inner and outer diameter of the ring becomes imbalanced.

The eLine piston ring has a circumferential groove towards its lower side, allowing surplus oil to be retained below the ring. The oil in this groove reservoir creates a circumferential pressure difference that generates controlled oil flow around the bore as the piston reciprocates, improving the uniformity of the oil film. The hydrodynamic function of the running surface profile has been developed in a way that allows for a reduced area for gas pressure force towards the upper side of the ring.

Federal-Mogul Powertrain’s eLine piston rings are currently with customers for validation in preparation for short term market introduction.

 
 

View our loyalty programs - www.retailstars.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
 
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
www.championparts.in
www.ferodo.in
+91-124-4786701
customerserviceindia@fmmotorparts.com

 

May 2018

 

May 2018
PRODUCT LAUNCH GLOBAL SNIPPETS
 

NEW PRODUCT INFORMATION

BRAKE SHOES
 
     
 
PART NUMBER APPLICATION LENGTH (MM) WIDTH (MM) THICKNESS (MM) MASTER PACK
FSB4287QS Toyota Qualis 245.50 49.50 4.80 5
FSB4245QS Hyundai Santro 165 30.50 4.10 5
FSB4202QS Maruti 800 / Zen (BI Type) 174.00 30.25 4.0 5
FSB4201QS Maruti 800 / Zen (KBX Type) 174.00 30.25 4.0 5
FSB4206QS Maruti Esteem / Tata Indigo (BI Type) 188.00 30.25 4.70 5
FSB4207QS Maruti Esteem / Tata Indigo (KBX Type) 188.00 30.25 4.70 5
FSB4262QS Tata Indica / Ace (BI Type) 155.00 30.25 4.00 5
FSB4261QS Tata Indica / Ace (KBX Type) 155.00 30.25 4.00 5
FSB4247QS Hyundai Accent CRDi / Getz 190.00 37.50 4.40 5
FSB4201QS Chevrolet Tavera 225.00 50.50 4.80 5
FSB4204QS Maruti Alto / WagnoR (BI Type) 172.00 26.00 3.60 5
FSB4281QS Ford Ikon / Escort 172.00 / 138.00 31.00 / 31.00 4.80 / 6.50 5
FSB4288QS Toyota Corolla 186.00 30.00 4.00 5
FSB4209QS Maruti Van (Type III) 205.00 35.00 4.00 5
FSB4246QS Hyundai Accent 167.00 35.00 4.50 5
FSB4286QS Toyota Innova 238.00 40.00 4.50 5
FSB4210QS Maruti Swift 188.75 29.80 4.50 5
FSB4249QS Hyundai Verna 192.00 30.45 4.70 5
FSB4289QS Toyota Etios 192.00 30.90 4.65 5
FSB4248QS Hyundai i10 168.00 29.90 4.20 5
FSB4202QS Chevrolet Spark / Matiz 171.00 29.80 4.00 5
FSB4205QS Alto K-10 (KBX Type) 162.00 / 146.00 25.00 / 25.00 4.00 / 4.00 5
FSB4211QS Maruti Swift (New Model) 186.00 26.00 4.50 5
FSB4251QS Hyundai i10 Grand / Xcent 192.00 30.45 4.70 5
FSB4271QS Honda City (Type 1, Type 2, Type 3) 162.00 29.80 4.20 5
FSB4203QS Maruti Alto (KBX Type) 172.00 26.00 4.00 5
FSB4250QS Hyundai Eon 163.00 25.30 4.10 5
HYUNDAI SANTRO ERLX 1.1L
PISTON SET (3210PPC)
 
       
 
Piston Dimensions (mm)
Bore Diameter 67
No of Cylinder Set 4
Piston Diameter 66.985
Top Land Height 4.8
Compression Height 24.6
Total Height 48.55
Pin Diameter x Length 17 X 46.3
Pin Bore Clearence 13
Groove Height (1st, 2nd and oil) 1.2 / 1.2 / 2.0
OE Part Number 2341002480
Pin Hole Offset 0.5
Pin Bore Feature Pin Relief
Matching Ring 5550GTX
 
Features and benefits:
  • Special Aluminium Silicon Alloy: Lesser expansion hence can work with lesser clearence
  • CNC milled bowl: Helps in complete conbustion and hence better fuel average
  • Solid section above pin boss: Provides strength to piston and hence longer life
  • Optimised inner contour: Piston can withstand heavy thermal loads
  • As cast oil slots: Lesser oil consumption
  • Thin top land: Lesser dread volume $ lesser emissions
  • Pin bore relief: For improved oil lubrication
HYUNDAI EON 0.8L
PISTON SET (3211PPN)
 
       
 
Piston Dimensions (mm)
Bore Diameter 67
No of Cylinder Set 3
Piston Diameter 66.980
Top Land Height 4.8
Compression Height 24.6
Total Height 48.7
Pin Diameter x Length 17 X 46.3
Pin Bore Clearence 13
Groove Height (1st, 2nd and oil) 1.2 / 1.2 / 2.0
OE Part Number 2341002480
Pin Hole Offset 0.5
Pin Bore Feature Pin Relief
Matching Ring 5552GTX
 
Features and benefits:
  • Special Aluminium Silicon Alloy: Lesser expansion hence can work with lesser clearence
  • CNC milled bowl: Helps in complete conbustion and hence better fuel average
  • Solid section above pin boss: Provides strength to piston and hence longer life
  • Optimised inner contour: Piston can withstand heavy thermal loads
  • As cast oil slots: Lesser oil consumption
  • Thin top land: Lesser dread volume & lesser emissions
  • Pin bore relief: For improved oil lubrication
  • Moly Coating: For better running in and initial lubrication
ENGINE OIL
 
We are delighted to launch Engine Oil in 7.5L variant. Diamond power, Kissan Shakti and Turbo Power Diesel Engine Oil are blended from deeply refined high viscosity index base stocks with high quality additives. All three diesel engine oil meets API engine oil specification.
 
 
Diamond Power SAE 15W-40 API

GD1540CI40CV - 7.5

Applicable for: TATA 407 and other Mini Trucks

 
Kissan Shakti SAE 15W-40 API CF4

GD1540CF40TR - 7.5

Applicable for: MAHINDRA, NEW HOLLAND and other Tractors

 
Turbo Power SAE 15W-40 API CH4

GD1540CH40CD - 7.5

Applicable for: SAFARI DICOR, STROME, SUMO GOLD, etc

 
 
Special Features & Benefits
  • Reduced engine scuffing and enhanced engine lubrication
  • Maximum protection from wear and carbon deposits
  • Very less oil consumption
  • Easier cold starting
  • Excellent all weather performance
  • Compatible to all types of catalytic converter
MAHINDRA 2.2L MHAWK
GASKET (PCH72132MLS010000E)
 
     
 
LAYER MATERIAL THICKNESS (MM) BORE DIAMETER (MM) COMPRESSED THICKNESS (MM)
TOP STAINLESS STEEL 0.25 85 1.4
MIDDLE CRCA 0.8 85 1.4
BOTTOM STAINLESS STEEL 0.25 85 1.4
TATA 4SP-SPACIO E II & III
RING SET (6887CKS)
 
PARAMETER SPEC
Diameter 97.0mm
No of Rings 3
No of cylinder set 4
GROOVE RING TYPE SPECIAL FEATURES BENEFITS
1st
CKS, KV1
Axial Height: 2.50 mm
Close Gap: 0.2 - 0.35
  • CKS ensures minimal wear & provides excellent scuff resistance
  • KV1 high strength material for greater bending break & wear resistance
  • Barrel honing provides better sealing with higher surface pressure
  • Inside step design for minimal blow
  • Low friction due to thin axial height
  • Longer ring life
  • Lesser oil consumption
2nd
POSITIVE TORSION, F14
Axial Height: 2.5 mm
Close Gap: 0.25-0.45
  • F`4 material
  • Positive torsion taper faced scraper for enhanced performance
  • Phospating coating increases oil retention property, reduces bedding in time and provides corrosion resistance
  • Longer ring life
  • Lesser oil consumption
  • Better bedding in time
3rd
Axial Height: 3.0mm
End Gap: 0.25-0.45
  • Gas nitrided steel ring for minimal wear
  • Exerts uniform wall pressure and excellent side sealing
  • Effective side sealing due to specially designed expander large oil drainage area
  • Narrow lands
  • Oil drain holes
  • Longer life
  • Longer ring life
  • Lesser oil consumption
 

GLOBAL SNIPPETS

Federal-Mogul Motorparts' National brand launches new product packaging across North America

Federal-Mogul Motorparts' National brand, provider of premium sealing solutions, is introducing new packaging for its product line, including wheel end and drivetrain seals, bearings, hubcaps, axle flange gaskets, unitized pinion seals and redi-sleeves.

The new trade dress is designed to leverage the recognizable red color of the National logo and features iconographic design to reflect each of the products contained inside. (National Gold-Series wheel-end seals will feature gold coloring with the same design elements of the rest of the product line.)

Service providers and distributors throughout the United States, Canada and Mexico should expect to see these new designs throughout 2018.

 

Federal-Mogul Motorparts launches Loyalty Program for Reborers in India

Under Retail STARs program, reborers can earn points on fitment of piston assemblies for 2 & 4 stroke (Petrol & CNG) Engine under GOETZE NAVRATNA SCHEME.

  • Web Access – www.retailstars.in
  • Mobile App – Can be downloaded by searching “FMMP Retail STARs 3” on Android.
  • Helpdesk Number: 011-40204630

Many improvements have been made in program structure.
For any queries regarding the program, please feel free to give us a call on helpline - 0124-4786708.

Gear up yet again for another exciting journey ahead!

 
 

View our loyalty programs - www.retailstars.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
 
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
www.championparts.in
www.ferodo.in
+91-124-4786701
customerserviceindia@fmmotorparts.com

 

April 2018

 

April 2018
PRODUCT LAUNCH MEDIA COVERAGE GLOBAL SNIPPETS
 

NEW PRODUCT INFORMATION

TVS JUPITER / WEGO / ZEST
PISTON KIT (01044GMP) (WITH RING 2219GTP)
 
         
 
Piston Dimensions (mm)
Bore Diameter 53.5
No. of rings 3
Ring Axial Height
1st 0.8
2nd 0.8
3rd 1.5
No of Cylinder Set 1
Total Height 39.1
Pin Diameter x Length 14 X 37.9
 
Features and benefits:
  • As Cast crown and special aluminum alloy (S2N) for strength
  • Thin ring grooves for low friction for better mileage & low oil consumption
  • Oil holes in oil ring groove for lower oil consumption
  • Moly Coated skirt
  • Top and oil ring in steel material
  • Second ring in KV1 material
YAMAHA RAY / RAYZ
PISTON KIT (01385GMP) (WITH RING 2380GTP)
 
         
 
Piston Dimensions (mm)
Bore Diameter 52.4
No. of rings 3
Ring Axial Height
1st 0.8
2nd 0.8
3rd 1.5
No of Cylinder Set 1
Total Height 35
Pin Diameter x Length 13 X 37.9
 
Features and benefits:
  • As Cast crown and special aluminum alloy for strength
  • Thin ring grooves for low friction for better mileage & low oil consumption
  • Tin Plated all over
  • Top and oil ring in steel material
  • Second ring in KV1 material
TATA ACE MEGA 0.8L TC BS4
PISTON KIT (3362PPC)
 
     
 
Piston Dimensions (mm)
Bore Diameter 78.0
No. of rings 3
Ring Axial Height
1st 2.0
2nd 2.0
3rd 3.0
No of Cylinder Set 2
Total Height 67
Pin Diameter x Length 28 X 63.0
Matching Ring 5732CKS
 
Features and benefits:
  • Special aluminum alloy for strength
  • Ring carrier type piston
  • Advanced moly coating and phosphating all over
  • Optimized inner contour
TATA ACE MEGA 0.8L NA
PISTON KIT (3361PPC)
 
     
 
Piston Dimensions (mm)
Bore Diameter 78.0
No. of rings 3
Ring Axial Height
1st 3.0
2nd 2.0
3rd 3.0
No of Cylinder Set 2
Total Height 67
Pin Diameter x Length 28 X 63.0
Matching Ring 5730CKS
 
Features and benefits:
  • Special aluminum alloy for strength
  • Ring carrier type piston
  • Top groove trapeze
  • Advanced moly coating and phosphating all over
  • Optimized inner contour
TATA AND ASHOK LEYLAND
HIGHWAY SPECIAL CV LINING
 
     
 
Part No. Application Holes per Lining Size Rivet Rivet per set
FHBHSM1.0A2 TATA FRONT, AMW FR, SWARAJ MAZDA, EICHER FRONT 10 STD Aluminium / L12 80
FHBHSM2.0A2 TATA REAR, EICHER REAR, MAN FRONT 10 STD Aluminium / L12 80
FHBHSM5.0A2 ASHOK LEYLAND 5" FRONT 10 STD Aluminium / L12 80
FHBHSM6.0A2 ASHOK LEYLAND 6" FRONT 10 STD Aluminium / L12 80
FHBHSM7.0A2 ASHOK LEYLAND 7" REAR 10 STD Aluminium / L12 80
FORD ENDEAVOUR , TOYOTA ALTIS AND NOVA MARK V
GLOW PLUGS
 
       
 
Part Code Application Voltage
CHN1302 FORD ENDEAVOUR OLD MODEL 11V
CHN1303 FORD ENDEAVOUR OLD MODEL 11V
CHN1804 TOYOTA ALTIS / ETIOS 11V
CHN2001 AMBSASSADOR NOVA MARK V 11V
OTHER LAUNCHES
 
Product Part Number Application Feature
RING KIT 5732CKS TATA ACE MEGA 0.8L TC BSIV SEMI INLAID CKS TOP RING
RING KIT 5730CKS TATA ACE MEGA 0.8L NA TRAPEZE SEMI INLIAD CKS TOP RING
LINER KIT 05100GPL EICHER TRACTOR OLD MODEL AS CAST SAND CORE PISTON CAVITY
LINER KIT 05400GPL EICHER TRACTOR NEW MODEL MACHINED PISTON CAVITY
 

MEDIA COVERAGE

 

GLOBAL SNIPPETS

First Customer Win for Federal-Mogul Powertrain's New Product Group Controlled Power Technologies

Federal Mogul Powertrain has got first commercial customer contract for its new product group Controlled Power Technologies (CPT). The long-term contract, worth around $100m, covers the development and series production of advanced starter-generator systems for an OEM.

CPT´s innovative electrification and hybridization products enable the integration of electric motor-generators for stop-start and various other hybridization applications. In addition, the portfolio includes exhaust-driven electrification technologies, combustion engine e-boosting and fuel cell e-compressors.

The products are suitable for use across a diverse range of drivetrain configurations and electrical architectures for the reduction of powertrain emissions while enhancing performance.

 
 

View our loyalty programs - www.retailstars.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
 
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
www.championparts.in
www.ferodo.in
+91-124-4786701
customerserviceindia@fmmotorparts.com

 

 

March 2018

 

March 2018
PRODUCT LAUNCH MEDIA COVERAGE GLOBAL SNIPPETS
 

NEW PRODUCT INFORMATION

CUMMINS 6BT EURO II
GASKET (PTS5313WTV)
 
S.NO. GASKET GASKET TYPE / MATERIAL
1 CYLINDER HEAD GASKET OE+ STEEL BACKBONE, FACING G4194
2 GASKET INTAKE MANIFOLD COVER NON ASBESTOS
3 GASKET AIR INTAKE CONNECTION NON ASBESTOS
4 GASKET CONNECTION NON ASBESTOS
5 GASKET TURBOCHARGER STEEL
6 GASKET EXHAUST MANIFOLD STEEL
7 ZEN PACKING NON ASBESTOS
8 GASKET OIL DRAIN TURBOCHARGER NON ASBESTOS
9 GASKET VALVE COVER SILICON RUBBER
10 RUBBER "O"RINGS RUBBER
11 GASKET VALVE COVER SILICON RUBBER
12 RUBBER "O"RINGS RUBBER
13 GASKET VALVE COVER SILICON RUBBER
14 RUBBER "O"RINGS RUBBER
15 GASKET VALVE COVER SILICON RUBBER
16 RUBBER RING RUBBER
17 ISOLATOR NOISE NON ASBESTOS
18 BENJO WASHER COPPER
19 COPPER WASHER SEALING COPPER
20 SEAL INJECTOR NON ASBESTOS
HERO CD100 / SPLENDOR
GASKET (PFS1380M)
 
S.NO. GASKET GASKET TYPE / MATERIAL NO. OF GASKET
1 CYLINDER HEAD GASKET MLS 1
2 CYLINDER BASE GASKET STEEL BACK BONE 1
3 CYLINDER HEAD COVER GASKET NON ASBESTOS 1
4 AIR FEED PIPE GASKET NON ASBESTOS 1
5 CLUTCH COVER GASKET NON ASBESTOS 1
6 CRANK CASE GASKET NON ASBESTOS 1
7 OIL PUMP COVER NON ASBESTOS 1
8 OIL PUMP BODY NON ASBESTOS 1
9 EXHAUST PIPE GASKET NON ASBESTOS + STEEL 1
10 CYLINDER HEADSIDE COVER L NON ASBESTOS 1
11 OIL FILTER ROTOR GASKET NON ASBESTOS 1
12 CYLINDER HEAD RS COVER NON ASBESTOS 1
13 SET OF O RINGS RUBBER 16
 
BAJAJ COMPACT BSIV
PISTON KIT (02014GMP)
 
         
 
Piston Dimensions (mm)
Bore Diameter 63.5
No. of rings 3
Ring Axial Height
1st 0.8
2nd 0.8
3rd 2.0
No of Cylinder Set 1
Total Height 38.04
Pin Diameter x Length 17 X 42.7
 
Features and benefits:
  • As Cast crown and special aluminum alloy (S2N) for strength
  • Thin ring grooves for low friction for better mileage & low oil consumption
  • Oil holes in oil ring groove for lower oil consumption
  • Top and oil ring in steel material
  • Second ring in KV1 material
MAHINDRA CENTURO/PANTERO
PISTON KIT (01047GMP)
 
       
 
Piston Dimensions (mm)
Bore Diameter 52.4
No. of rings 3
Ring Axial Height
1st 0.8
2nd 0.8
3rd 1.50
No of Cylinder Set 1
Total Height 35
Pin Diameter x Length 13 X 37.9
 
Features and benefits:
  • As Cast crown and special aluminum alloy (S2N) for strength
  • Thin ring grooves for low friction for better mileage & low oil consumption
  • Oil holes in oil ring groove for lower oil consumption
  • Top and oil ring in steel material
  • Second ring in KV1 material
MAHINDRA MDI 3200
PISTON KIT (05151MP)
 
     
 
Piston Dimensions (mm)
Bore Diameter 88.9
No. of rings 3
Ring Axial Height
1st 3.0
2nd 2.5
3rd 4.0
No of Cylinder Set 4
Total Height 84.35
Pin Diameter x Length 28 X 69.6
 
Features and benefits:
  • Special aluminum alloy for strength
  • Top ring groove trapeze for longer life
  • Oil holes in oil ring groove for lower oil consumption
  • Graphite and phosphate fo better initial lubrication
  • With 8420EUROSHAKTI Ring Set
BAJAJ 3W 2STROKE
SPARK PLUG (CCHRL82CAM)
 
Parameter Specification
Hexagon Size 21mm
Insulator Shape 10.5mm Ø With Ribs
Terminal Solid post
Seat Zn Plated Steel Gasket
Thread and Thread Length M14 x 1,25mm / 12.7mm
Gap 0.6
Resistor Yes
 
Feature:
  • Superior corrosion resistance
  • Dependable and proven performance
  • Increased conductivity and heat control for good overall wear
 
Fits In:
  • Bajaj 3W 2S
  • Sunny
  • ZIP
  • SPIRIT Kinetic Safari
EICHER CANTER
BUSH SET
 
     
PART NUMBER PCS / SET MATERIAL OUTER DIA (mm) MAXIMUM WIDTH (mm) WALL (mm)
55-4703/4 4 Copper – tin – lead (H24) 37.025 33.50 1.50
55-4703/4 4 Copper – tin – lead (H24) 37.025 33.50 1.50
OTHER LAUNCHES
 
Product Part Number Application Feature
PISTON KIT 01904GMP HONDA ACTIVA 100CC CROWN AS CAST
PISTON KIT 01016MPK HERO HONDA SUPER SPLENDOR WITHOUT COUPON
PISTON KIT 01024MPK TVS STAR 110CC WITHOUT COUPON
PISTON LINER KIT 0276CGPL INDUSTRIAL 102MM RING MOUNTED
GLOW PLUG CHN0101-E TATA INDICA , INDIGO INTENDED VOLTAGE 11V
 

MEDIA COVERAGE

Engine Oil Launch Car & Commercial range

Federal Mogul Motorparts is launching Engine oil in car & commercial range in major towns of North & West zones like Punjab, Delhi, Haryana, Rajasthan, UP, M.P and Ahmedabad.

The market response is really good. The sales team is visiting the retailers along with the branded van for product detailing and highlighting product USP.

 

 

 

The launch is expected to carry on in 2 phases. While Phase 1 will focus on North & West Zones. Phase 2 will be covering East and South Zones, and will start July onwards.

Team is very confident for increasing Engine oil market share in coming months.

 

Bal Kalakaar- 2017

Bal Kalakaar drawing competition was launched for kids of our network partners. We got good amount of entries from all across India. The entries were evaluated internally and winners were selected. All the entries received were excellent, competition was really tough.

Finally 3 winners were selected in each categories as First, Second, Third. Not only this, 5 consolation winners were also selected in each category. The prizes were the great attraction for all kids.

 

 

First prize was Nikon Camera, Second Prize was Sony DVD and Third prize was Philips Bluetooth speaker. Not only this consolation prize winners were also awarded with Disney wrist watches. Winners were felicitated by our local team. All the participants received Orpat Alarm clocks.

Kids were really excited to get these prizes. Network partners were very happy with this contest. They mentioned that they will be waiting for the next year’s contest on the same line.

 

GLOBAL SNIPPETS

Federal-Mogul Motorparts to Showcase FP Diesel® Components for Commercial Engines at bauma CONEXPO Africa 2018

Federal-Mogul Motorparts, a leading global supplier of products and services showcased its FP Diesel® range for heavy-duty construction machinery, materials-handling, and mining at bauma CONEXPO 2018. The FP Diesel® brand comprises high-quality and OE quality parts for off-highway and heavy-duty engines. This includes diesel engine bearings, pistons, liners, and sealing products (CHG), in addition to Champion® and BERU®* industrial spark plugs and glow plugs.

During the show, FP Diesel introduced new piston and cylinder liner kits for selected John Deere® PowerTech® engines. These popular four- and six-cylinder engines are used in a variety of John Deere agricultural and construction equipment, including the 6090 9.0L Cylinder Kit FP-DZ10211. The kits include pistons, liners, rings, pins, retainers, and sealing rings, everything required for an engine rebuild.

New ML7 head gaskets for John Deere 8.1L and Power Techengines were also on display. ML7 is a highly-advanced, multi-layer-core gasket technology that offers significantly-enhanced combustion and fluid-sealing capabilities. Its combined heat and power (CHP) cogeneration and induction-hardened ID liner technologies was also on display, alongside a range of Champion industrial ignition products.

A section of the Federal-Mogul Motorparts stand was dedicated to the new range of popular Perkins® engines. The Perkins range from FP Diesel covers 120 part numbers, and offers pistons, rings, liners, bearings, and gaskets, some of which were on display at the trade fair. These high-quality components come in unique packaging that offers Smart Authentication™, a security feature that ensures product authenticity and quality.

“Federal-Mogul Motorparts’ aims to promote its extensive product range to both machine owners and end users at the trade fair,”. As per EMEA. “bauma CONEXPO Africa provides the construction and mining industry in Africa with a professional platform for networking, investment, and the exchange of ideas and information and is considered as the most important event in Africa.”

 
 

View our loyalty programs - www.retailstars.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
 
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
www.championparts.in
www.ferodo.in
+91-124-4786701
customerserviceindia@fmmotorparts.com

 

February 2018

 

February 2018
PRODUCT LAUNCH MEDIA COVERAGE GLOBAL SNIPPETS
 

NEW PRODUCT INFORMATION

GREEN TRACTOR
RING SET (8475PLASMA)
 
PARAMETER SPEC
Diameter 106.5
No of Rings 3
No of cylinder set 3
GROOVE RING TYPE SPECIAL FEATURES
1st
TRAPZE, MOLY
Axial Height: 2.40 mm
Steel
  • MOLY FILLED with phosphating, ensures minimal wear & provides excellent scuff resistance.
  • STEEL MATERIAL - High strength material for greater break & wear resistance.
  • Barrel Honed for low oil consumption.
2nd
TAPER FACE REVERSE TORSION
Axial Height: 2.385 mm
  • Phosphated for lesser friction & reduces bedding in time.
  • High strength material - IKA
  • Taper faced ring for lower oil consumption.
3rd
OIL CHROME
Axial Height: 3.462mm
  • Profile ground contact land for higher radial pressure & better oil scraping effect.
  • Chrome coated lands provide higher wear.
  • Resistance & excellent scuff resistance
TATA ACE (DIESEL)
RING SET (5764EUROSTEEL)
 
PARAMETER SPEC
Diameter 75
No of Rings 3
No of cylinder set 2
GROOVE RING TYPE SPECIAL FEATURES BENEFITS
1st
Nitrided, Steel
Axial Height: 2.00 mm
Close Gap: 0.15 - 0.30mm
  • NITRIDED ensures minimal wear & provides excellent scuff resistance.
  • STEEL-high strength material for greater bending break & wear resistance.
  • Barrel Honing provides better sealing with high surface pressure.
  • Low friction due to thin axial height
  • Longer Ring life
  • Lesser oil consumption
2nd
Axial Height: 2.00 mm
Close Gap: 0.15 - 0.30mm
  • Taper faced ring for better scraping of oil
  • Specially designed low end gap
  • Phosphating coating increases oil retention property, reduces bedding in time and provides corrosion resistance
  • Lesser Oil Consumption
  • Better bedding
3rd
Axial Height: 3.00 mm
End Gap: 0.15-0.3mm
  • NITRIDED , steel material for high breaking strength with wear resistance
  • Excerts uniform wall pressure and excellent side sealing.
  • Effective side sealing due to specially designed expander large oil drainage area
  • Narrow lands with specially designed close gap
  • Longer Ring life
  • Lesser oil consumption
HYUNDAI EON
RING SET (5552GTX)
 
PARAMETER SPEC
Diameter 67
No of Rings 3
No of cylinder set 3
GROOVE RING TYPE SPECIAL FEATURES BENEFITS
1st
Chrome, Steel
Axial Height: 1.20 mm
Close Gap: 0.15 - 0.30mm
  • CHROME ensures minimal wear & provides excellent scuff resistance.
  • STEEL-high strength material for greater bending break & wear resistance.
  • Barrel Honing provides better sealing with high surface pressure.
  • Low friction due to thin axial height
  • Longer Ring life
  • Lesser oil consumption
2nd
scarper , Reverse torsion
Axial Height: 1.20 mm
Close Gap: 0.20 - 0.30mm
  • Scrapper ring for better scraping of oil
  • Taper reverse torsion action for enhanced performance.
  • Phosphating coating increases oil retention property, reduces bedding in time and provides corrosion resistance
  • Lesser Oil Consumption
  • Better bedding
3rd
3POR , Chrome , Steel
  • Chrome coated steel material for high breaking strength with wear resistance
  • Excerts uniform wall pressure and excellent side sealing.
  • Effective side sealing due to specially designed expander large oil drainage area
  • Longer Ring life
  • Lesser oil consumption
HYUNDAI SANTRO ERLX
RING SET (5550GTX)
 
PARAMETER SPEC
Diameter 67
No of Rings 3
No of cylinder set 4
GROOVE RING TYPE SPECIAL FEATURES BENEFITS
1st
Nitrided, Steel
Axial Height: 1.20 mm
Close Gap: 0.15 - 0.30mm
  • NITRIDED ensures minimal wear & provides excellent scuff resistance.
  • STEEL-high strength material for greater bending break & wear resistance.
  • Barrel Honing provides better sealing with high surface pressure.
  • Low friction due to thin axial height
  • Longer Ring life
  • Lesser oil consumption
2nd
scarper , Reverse torsion
Axial Height: 1.20 mm
Close Gap: 0.20 - 0.35mm
  • Scrapper ring for better scraping of oil
  • Taper reverse torsion action for enhanced performance.
  • Phosphating coating increases oil retention property, reduces bedding in time and provides corrosion resistance
  • Lesser Oil Consumption
  • Better bedding
3rd
3POR , NITRIDED , Steel
  • NITRIDED , steel material for high breaking strength with wear resistance
  • Excerts uniform wall pressure and excellent side sealing.
  • Effective side sealing due to specially designed expander large oil drainage area
  • Longer Ring life
  • Lesser oil consumption
MAHINDRA GUJRAT TRACTOR
PISTON ASSEMBLY (5853PPC)
 
         
 
Piston Dimensions (mm)
Matching ring 8411TKDCES
Nominal Bore Diameter 102
Piston Diameter 101.89
Top Land height 10
Piston Liner Clearance 0.110
Compression Height 66.5
Total Height 105.5
Pin Diameter x Length 35 X 85
Pin bore clearance 0.003~0.013
Coating skirt graphite coated
Groove height
1st 2.695
2nd 2.395
3rd 4.030
 
Features and benefits:
  • High Durability Aluminium –Silicon Alloy
  • NI-Resist CI Ring Carrier in 1st Ring Groove for more life
  • Skirt graphite coated for better bedding
  • As cast oil Slots for better flow of oil
 

MEDIA COVERAGE

Auto Expo 2018

Federal Mogul Motorparts participated in Auto expo-2018 at Pragati Maidan, New Delhi. It was a great opportunity to showcase the complete product range and new launches among existing and potential customers. We displayed Engine oil, Block kits, Heavy duty and complete engine, braking service range for bi wheeler, car & commercial segment.

 

Multiple existing & potential customers vihsited our stall from across India and countries like Nepal, Sri Lanka, Bangladesh, Algeria, Ghana, Dubai, Egypt and middle east. Product display was very much appreciated by the customers which gave them touch & feel of the complete range. The product catalogues and brochures for 2/3 wheeler, car, commercial, industrial and tractor range were shared with visitors. Product specific leaflets focusing on product USPs were also available for customers. The service engineers were available at the stall to answer the customer queries across all 4 days.

 

The huge wall hoardings of 20x40 feet size on the main entry of two prominent halls grabbed the attention of all visitors. Overall it was a great show for new potential, network expansion and Branding.

 

GLOBAL SNIPPETS

Champion® Battery Line for Automotive, Heavy-Duty and Light-Duty Applications Now Available In US

Federal-Mogul Motorparts' iconic Champion® brand continues its expansion with the introduction of a full line of batteries for commercial vehicles, light vehicles, marine, golf cart, power sport, and lawn and garden applications. Initially introduced in major Southern California markets as a kick-off to a national campaign, these new products will be available throughout the country in March.

Powered by an innovative positive grid technology, Champion batteries are engineered to optimize the flow of electricity, minimize corrosion and deliver consistent performance over battery life. The Champion battery range includes 180 products across many applications. For automotive uses, the line offers coverage for 98% of vehicles in operation.

 

"Champion has also recently rolled out new products from its expanded product portfolio, including light maintenance products and lifestyle elements, to give consumers a full range of choices for their automotive needs."
In addition to batteries, the Champion product range today includes easy-to-install bridge-style, beam, hybrid, winter and rear wiper blades; oil, air and cabin air filters; batteries for automotive, commercial, marine, golf cart and lawn-and-garden uses; premium capsules, HID and sealed beam headlights and LED and incandescent light bulbs; and world-class replacement spark plugs for automotive, motorsports, small-engine and other applications, all with award-winning new packaging.
 
 

View our loyalty programs - www.retailstars.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
 
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
www.championparts.in
www.ferodo.in
+91-124-4786701
customerserviceindia@fmmotorparts.com

 

December 2017

 

December 2017
PRODUCT LAUNCH MEDIA COVERAGE GLOBAL SNIPPETS
 

NEW PRODUCT INFORMATION

MAHINDRA ARJUN
PISTON ASSEMBLY (05604PPC)
 
         
 
Piston Dimensions (mm)
DIAMETER 96.0
TOTAL HEIGHT 90.2
PIN DIAMETER 32
RING 8205TKFDCES
 
Features and benefits:
  • NI-Resist CI Ring Carrier in 1st Ring Groove for more life
  • J groove below oil ring for better oil consumption
  • As cast oil drain Notch
  • As cast Window
MAHINDRA GENSET
PISTON ASSEMBLY (05602PPC)
 
         
 
Piston Dimensions (mm)
DIAMETER 96.0
TOTAL HEIGHT 90.2
PIN DIAMETER 32
RING 8205TKFDCES
 
Features and benefits:
  • NI-Resist CI Ring Carrier in 1st Ring Groove for more life
  • J groove below oil ring for better oil consumption
  • As cast oil drain Notch
  • As cast Window
KIRLOSKAR GENSET(DV8/DV10/DV12)
PISTON ASSEMBLY (2530PPC)
 
         
 
Piston Dimensions (mm)
DIAMETER 130.0
TOTAL HEIGHT 129.8
PIN DIAMETER 55
RING 3517TKIDCES
 
Features and benefits:
  • NI-Resist CI Ring Carrier in 1st Ring Groove for more life
  • J groove below oil ring for better oil consumption
  • As cast oil drain Notch
  • As cast Window
BAJAJ PLATINA 100 CC ES
PISTON ASSEMBLY (01055GMP)
 
       
 
Piston Dimensions (mm)
DIAMETER 47
NO OF RING 3
NO OF CYLINDER SET 1
 
Features and benefits:
  • As Cast crown and valve pockets
  • Thin ring grooves for better sealing of gases & oil scrapping
  • Oil holes in oil ring groove for lesser oil consumption
  • All over Tin coated better bedding in
  • Top and Oil steel ring
  • Second taper faced in KV1 material
IRIDIUM SPARK PLUG
SPARK PLUG (RC8WYPB3)
 
Parameter Specification
Hexagon Size 16mm
Electrode Iridium
Seat Zn Plated Steel Gasket
Thread and Thread Length M12 x 1,25mm / 19mm
Gap 0.9 - 1.0
 
Feature:
  • Superior corrosion resistance
  • Dependable and proven performance
  • Increased conductivity and heat control for good overall wear
 
Fits In:
  • Mercedes Benz S65 AMG , SL65 AMG , CL 65 AMG , CL 600
  • Volvo XC90 , S80 , S60
  • Audi TT 3.2L V6 Quattro
  • Volkswagen Passat 1.8L
  • Maruti Suzuki SX4 , Grand Vitara , Esteem , Zen Estilo
  • G.M Optra-1.6L, Corsa1.6L, Astra-1.6L, Nexia
  • Tata Nano
IRIDIUM SPARK PLUG
SPARK PLUG (RC10WYPB4)
 
Parameter Specification
Hexagon Size 16mm
Electrode Iridium
Seat Zn Plated Steel Gasket
Thread and Thread Length M12 x 1,25mm / 19mm
Gap 1.0 - 1.1
 
Feature:
  • Superior corrosion resistance
  • Dependable and proven performance
  • Increased conductivity and heat control for good overall wear
 
Fits In:
  • Audi A6 Quattro , A4 Quattro , TT 1.8L
  • BMW 530i
  • Volvo XC 90 (4.4L) , S80 (4.4L)
  • Hyundai - Santro, Accent1.5/1.6L, Getz, i10-1.1L (w/o Kappa), Elantra, Verna
  • Honda - City1.3/1.5L (upto Sep 2008), Brio (Petrol)
IRIDIUM SPARK PLUG
SPARK PLUG (RA7WYB3)
 
Parameter Specification
Hexagon Size 16mm
Electrode Iridium
Seat Zn Plated Steel Gasket
Thread and Thread Length M14 x 1,25mm / 19mm
Gap 0.7 - 0.8
 
Feature:
  • Superior corrosion resistance
  • Dependable and proven performance
  • Increased conductivity and heat control for good overall wear
 
Fits In:
  • Lamborghini Murcielago
  • Maruti Mpfi - Alto 800-12V, Alto 1.1L- 16V,Wagon- R,800cc- 5 Gear
  • GM Beat
 

MEDIA COVERAGE

Spot a Champion Contest

Very exciting contest has been launched. Participants have to just spot a Champion product being installed in any vehicle and click the picture through a specially designed app. This is a great chance to win exciting prizes. The APP can be simply downloaded through ‘FMMP Retail STARs’ on Android or iOS. Another way to participate is to give a missed call on 1800-1200-919 and register.

 

While participating in the contest using APP the user has to open ‘MOMENTS’ section, and simply upload the image. Many exciting prizes are waiting for the winner.

To know more details, click http://www.championparts.in/promotions.html

 

Be A Champion contest

This contest has been worked out to recognize the real life Champions. Entries have been invited by the network partners, distributors, retailers, mechanics, reborers their friends, family members or relatives in 250 words about their achievements and passion. Anybody who could pursue their passion despite all odds or limitations of life is a Champion in his own way. Champion salutes the champion through this contest. The participants are required to write up in 250 words about their achievement along with 2-3 pictures. The winners will be evaluated by our panel of judges at Head office. Exciting prizes upto Rs. 500,000 are there to be won. It’s a great chance to win and get recognized as a CHAMPION!!

 

Palwal Kitting Plant

Federal Mogul Motorparts inaugurated State of art kitting plant at Palwal. It is centralized facility to cater Pan India demand & supply. It is spread over 66000 sq ft. of area. The plant is equipped with OE quality machinery. The branding across major areas like reception, main plant area, pantry and office area gives it a great look.

 

GLOBAL SNIPPETS

Federal-Mogul Motorparts Receives Eight Awards for Excellence in Automotive Communications Award Program

Federal-Mogul Motorparts received eight awards for excellence in business-to-consumer and business-to-business communications in the annual Automotive Communications Award program, created by Women in Auto Care. The awards recognize companies and agencies that provide automotive information through outstanding advertising, marketing and public relations efforts. Winners were recognized at the Women in Auto Care press conference

Federal-Mogul Motorparts received the following awards for excellence, the first seven in the "B2C Category," and the last one in the "B2B Category:" The detail award categories are Print/Electronic Ad: MOOG® Independent Testing Ad, Direct Mail Piece or Campaign/Newsletter: Garage Gurus™ Garage Forum Newsletter, Education Article: PartsMatter.com, Special Promotions/Promotional Events- Wagner® #ThingsWorthBraking For Contest, Posters and Signage: Fel-Pro® Leak, Awareness Campaign, Application for Mobile Device: Garage Gurus App for Mobile Device, Media Outreach towards Non-English-Speaking Audience: Garage Gurus Training, Newsletter to Customer or "External Audience:" Garage Gurus Monthly Newsletter

 
 

View our loyalty programs - www.fmmp.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
 
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
www.championparts.in
www.ferodo.in
+91-124-4786701
customercare.india@fmmotorparts.com

 

April 2017

 

 
April 2017
PRODUCT LAUNCH MEDIA COVERAGE GLOBAL SNIPPETS
 
 

NEW PRODUCT INFORMATION

 
   
(All Dimensions in mm)
TVS KING
BLOCK KIT (01033GPL)
 
       
 

Features

 
   
  • NI-Resist CI Ring Carrier in 1st Ring Groove for more life.
  • Graphite coated for better running
BAJAJ DISCOVER 125CC DTSi
BLOCK KIT (01815GMP)
 
       
PARAMETER SPEC
Diameter 54
No of Rings 3
No of cylinder set 1
 

Features

 
   
  • As Cast crown
  • Thin ring grooves for better sealing of gases & oil scrapping
  • Tapered Pin-boss to reduce weight thus better mileage
  • Oil holes in oil ring groove for lesser oil consumption
  • Skirt Moly Coated for better bedding in
  • Top and Oil steel ring
  • Second taper faced
MAHINDRA DURO / RODEO / FLYTE
BLOCK KIT (01038GP)
 
       
PARAMETER SPEC
Diameter 52.4
No of Rings 3
No of cylinder set 1
 

Features

 
   
  • As Cast crown
  • Thin ring grooves for better sealing of gases & oil scrapping
  • Oil holes in oil ring groove for lesser oil consumption
  • Box type Slipper design for low weight & better mileage
  • Tapered Pin-boss and less weight
  • Top and Oil steel ring
  • Second taper faced
TATA CUMMINS 6BT EIII
RING SET (5328SHAKTI)
 
PARAMETER SPEC
Diameter 102
No of Rings 3
No of cylinder set 6
GROOVE RING TYPE SPECIAL FEATURES
1st
Trapeze. Chrome Barrel honed
Axial Height: 3.00 mm
End Gap: 0.2 - 0.4mm
  • Chrome Coated with phosphating, ensures minimal wear & provides excellent scuff resistance.
  • KV1-high strength material for greater break & wear resistance.
  • Lower sharp edge, barrel Honed ring for low Lube oil consumption .
2nd
Axial Height: 2.39 mm
End Gap: 0.30-0.45 mm
  • Taper faced for lower oil consumption.
3rd
Axial Height: 4.00 mm
End Gap: 0.15 – 0.40mm
  • Profile ground contact land for higher radial pressure & better oil scraping effect.
  • Chrome coated lands provide higher wear resistance & excellent scuff resistance.
FT 60/70 AVL
MAIN BEARING
 
CONTENT Flange bearing Lower / Upper Main bearing Lower / Upper
PCS / SET 1 each 3 each
MATERIAL Copper – tin – lead (H24) Copper – tin – lead (H24)
SHAFT DIA 85.644 85.644
HOUSING DIA 92.065 92.065
WALL 3.165 3.165
LENGTH 32.84 25.2
 

Features

 
   
  • High resistance to overlay wear and fatigue.
  • Very good load bearing capacity
  • Good corrosion resistance
  • Nickel plated for better embedding capability
FT 60/70 AVL
CON ROD BEARING
 
CONTENT CR Bearing
PCS / SET 6
MATERIAL Copper – tin – lead (H24)
SHAFT DIA -
HOUSING DIA 73.815
WALL 1.963
LENGTH 30.2
 

Features

 
   
  • High resistance to overlay wear and fatigue.
  • Very good load bearing capacity
  • Good corrosion resistance
  • Nickel plated for better embedding capability
 
 

MEDIA COVERAGE

 
   

ACMA Automechanika 2017, New Delhi

The 3rd edition of India’s premium automotive aftermarket trade fair - ACMA Automechanika New Delhi, kick-started on 21st March with more than 550 exhibitors from 17 countries showcasing the latest in aftermarket, spread across 19,500 sqm.

This biennial event was a great opportunity for wholesalers, distributors, traders and component manufacturers to showcase their innovations besides getting access to global technology for future synergies and partnerships. Show was on from 21 Mar-24 Mar. Federal-Mogul Motorparts had its presence in the Safety pavilion, Hall no. 11. This Safe Drive pavilion was designed to undertake several measures to promote Road Safety and reduce road accidents through introduction of intelligent transport system, improved road engineering, safety regulations and on use of genuine parts to prevent road accidents.

A Seminar was also organised by ACMA for initial two days focusing on applicability of digitization for network partners. After which a panel discussion was organised by eminent personalities of the Auto motive industry on digital economy in Aftermarket. It was very well appreciated by all channel partners and industry attendees!!

 
 

Branded Vans Pan India Promotion

Champion and Ferodo Van

The van is branded as per the brand standards in a very classy look. One side it represents Champion brand and opposite side Ferodo brand. It is loaded with LED screen, which is utilised to show various brand related videos. It has panels in the backside on which products are displayed during demos and interaction with mechanics & other channel partners.

The videos played on the screen help team members get individual attention and to explain vision, mission & technology uphold of Federal-Mogul Motorparts. It is a great platform to give touch & feel of the product while explaining the product to mechanics. Not only this, the Champion/ Ferodo van also helps to cover maximum people in the visited location. From February to Apr, 2017 it has covered all part of Delhi, Eastern & Western UP including major towns like Ghaziabad, Agra, Meerut, Lucknow, Varanasi, Allahabad, Kanpur and surroundings.

Next month the van is scheduled to visit Himanchal Pradesh, Chandigarh, Ambala & Punjab. The van is surely a head turner. The response from market about this Van is amazing. The mechanics are really excited to see this brand van, recall value is also high!!

Goetze Van

It started in March, 2016. It was initially used to cover majorly North including Delhi, Meerut, Ghaziabad, Rohtak, Hissar and Central including Chattisgarh (Durg, Raipur, Bhilai); MP (Satna, Gwalior, Riva, Bhopal); Rajasthan (Jaipur, Bharatpur, Bhilwara, Udaipur, Ajmer). The van is fully loaded with brand representation focusing on GOETZE Engine Expertise. It has LED display and cabinets on both the sides and back portion for product display.

Engine specific & F-M Motorparts videos are run during mass interaction. Product touch & feel is given to mechanics & channel partners for better association and product recall. It is branded in pure Goetze brand colors. During March & April, 2017 the van was sent to Andhra Pradesh. It is covering Hyderabad, telangana & surroundings there. In May & June the van is further expected to cover Bangalore & surroundings.

 
 
 

GLOBAL SNIPPETS

 
   

Federal-Mogul Powertrain Debuts New Pokal Industrial Spark Plug

Federal-Mogul Powertrain has introduced a new industrial spark plug with high mechanical and electrical strength. The Pokal spark plug offers increased robustness for use in new engine applications with high peak cylinder pressures while also enabling the use of larger electrodes, providing increased service life and enhanced performance. The unique shape of the insulator core nose increases its resistance to mechanical pressure waves, allowing OEMs to use more aggressive combustion strategies for improved engine efficiency without reducing spark plug life.

Conventional insulators have a conical nose, the shape of which defines the heat range of the plug and ultimately limits the thermal extraction and electrical properties. The nose of the Pokal spark plug incorporates a cup-shaped cavity around the center electrode, improving both the electrical and mechanical strength. This shape allows the plug to better withstand increased voltage demand requirements, in addition to a more aggressive combustion setting.

The Pokal spark plug has been released for use in engines rated between 100 KW and 600 KW and has been in production since 2016. This technology is of interest worldwide for marine, off-highway and stationary industrial engines using gaseous fuels, including natural gas, landfill gas and bio-gas.

Champion was the first to pioneer ignition products for heavy-duty and industrial applications and, for over 100 years, is still driving the market in product excellence. The company’s products and services enable improved fuel economy, reduced emissions and enhanced vehicle safety.

Federal-Mogul operates two independent business divisions, each with a chief executive officer reporting to Federal-Mogul's Board of Directors. Federal-Mogul Powertrain designs and manufactures original equipment powertrain components and systems protection products for automotive, heavy-duty, industrial and transport applications. Federal-Mogul Motorparts sells and distributes a broad portfolio of products through more than 20 of the world’s most recognized brands in the global vehicle aftermarket, while also serving original equipment vehicle manufacturers with products including braking, wipers and a range of chassis components. Federal-Mogul was founded in Detroit in 1899 and maintains its worldwide headquarters in Southfield, Michigan. The Company has nearly 53,000 employees in 24 countries. For more information, please visit www.federalmogul.com.

 
 

View our loyalty programs - www.fmmp.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
 
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
www.championparts.in
www.ferodo.in
+91-124-4786701
customercare.india@federalmogul.com

 

March 2017

 

March 2017
PRODUCT LAUNCH MEDIA COVERAGE GLOBAL SNIPPETS
 

NEW PRODUCT INFORMATION

FORD FIESTA
RING SET (5801CKS)
 
PARAMETER SPEC
Diameter 73.7
No of Rings 3
No of cylinder set 4
GROOVE RING TYPE SPECIAL FEATURES
1st
Trapeze. Cks Assymetrical Barrel
Axial Height: 2.50 mm
Close Gap: 0.2 - 0.35
  • CKS coated with phosphating, ensures minimal wear & provides excellent scuff resistance.
  • KV1-high strength material for greater break & wear resistance.
  • Barrel honing provides better sealing with line contact & high surface pressure.
  • Assymetrical barrel Honed ring for low Lube oil consumption.
2nd
Axial Height: 0.8 - 1.00 mm
Close Gap: 1.95mm
  • Reverse Torsion by internally stepped at bottom for lower oil consumption.
3rd
Axial Height: 2.50 mm
Close Gap: 0.2 - 0.4 mm
  • Profile ground contact land for higher radial pressure & better oil scraping effect.
  • Chrome coated lands provide higher wear resistance & excellent scuff resistance.
MAHINDRA ARJUN
RING SET (8205TKFDCES)
 
PARAMETER SPEC
Diameter 96
No of Rings 3
No of cylinder set 1
GROOVE RING TYPE SPECIAL FEATURES
1st
Trapeze. Chrome Semi Inlaid
Axial Height: 3.00 mm
End Gap: 0.3 - 0.45mm
  • CKS Coated Semi Inlaid with phosphating, ensures minimal wear & provides excellent scuff resistance.
  • KV1-high strength material for greater break & wear resistance.
  • Assymetrical barrel Honed ring for low Lube oil consumption.
2nd
F14 Plain Taper faced
Axial Height: 2.50 mm
End Gap: 0.75 - 1.00mm
  • Phosphated for lesser friction & reduces bedding in time.
  • High Strength material – F14.
  • Reverse Torsion by internally stepped at bottom for lower oil consumption.
3rd
Axial Height: 3.00 mm
End Gap: 0.3 - 0.5mm
  • Profile ground contact land for higher radial pressure & better oil scraping effect.
  • Chrome coated lands provide higher wear resistance & excellent scuff resistance.
EICHER JUMBO
PISTON ASSEMBLY (04134PPC)
 
       
 
Piston Dimensions (mm)
DIAMETER 100
TOTAL HEIGHT 110.7
PIN DIAMETER 34
RING 6882STLPREM
 
Features and benefits:
  • NI-Resist CI Ring Carrier in 1st Ring Groove for more life.
  • Graphite coated for better running
 

MEDIA COVERAGE

Launch of Engine Oil by Engine Experts

Federal-Mogul Motorparts, a division of Federal-Mogul Holdings Corporation, has expanded its product range under legendary Goetze brand by introducing Goetze Engine Oil.

From the house of Engine Experts, Goetze Engine Oil range covers 2 & 3 Wheeler, Car & Commercial vehicle segments and is available in convenient unit sizes from 800 ml to 210 litres.

Carrying the same legacy as that of its existing market leader products – Goetze Piston, Piston Rings, Engine Valves, Block Kits & Cylinder Liners; Goetze Engine Oil is formulated with superior quality base oils & advance high performance additives for modern engines. Meeting present day stringent lubrication demands and environmental norms, it offers superior abrasion resistance & viscosity stability.

Along with excellent cleansing properties, Goetze Engine Oil ensures best performance & extended life of Engine, Clutch & Gear with its unique Active Technology Molecules.

Goetze Special Grease introduced along with Engine Oil offers superior surface adhesion and reduced friction under all riding conditions.

For best results, it is recommended to use Goetze Engine Oil with Goetze Piston, Piston Ring and Engine Valve.

In phase 1 for the launch of Engine oil started in February, 2017 in Delhi, NCR, Haryana, UP, Punjab, Ludhiana, Chandigarh, Rajasthan. Second phase launch was started in Chhattisgarh, Maharashtra, Gujarat & MP. Third phase is expected to start in April month. All the distributors, retailers & mechanics are contacted by the local sales team along with the branded van.

 

Ferodo website launched

We are pleased to inform that our online resource for complete Ferodo product range is now live and can be accessed at: www.ferodo.in

 

GLOBAL SNIPPETS

Federal-Mogul Motorparts launches 2017 European graduate recruitment drive

Federal Mogul Motorparts’ European Graduate Program was inaugurated in 2016

Federal-Mogul Motorparts has expanded its European Graduate Program, to provide opportunity to the top graduates for developing their career in multiple sectors like engineering, research & development, logistics and finance. The program has been continued in 2017 too, its duration is of 24-months, which is designed to provide growth opportunities to graduates for developing their skills and expertise by working across Europe with globally recognized brands. The program is now open in current year too and the interested applicants can apply online at eugraduates.eu.

A range of opportunities exist across Europe, including engineering, finance, information systems, operations, distribution, manufacturing, research and development, purchasing, sales and marketing, logistics, human resources and eBusiness. This program has given great opportunities to students in the UK, Germany, Italy, Belgium, the Czech Republic and Romania. It is a great chance for qualified and ambitious professionals

In this program universities seeking the most suitable candidates, will be invited to apply for the European Graduate Program. “A written application, followed by an interview, will provide a great opportunity to the applicants to meet Federal-Mogul Motorparts management, course leaders and expert mentors. And if they get successful, an invitation to attend a one-day assessment center workshop will be given to them. The rigorous process is designed to find the right people and match them to the right opportunity.”

The European Graduate Program is part of a global initiative from Federal-Mogul Motorparts to support graduates and young professionals starting their career.

 

Federal-Mogul Motorparts to Showcase Commercial Vehicle Offerings at CONEXPO-CON/AGG in Las Vegas

Federal-Mogul Motorparts has displayed its leading commercial vehicle products for the wheel end, visibility and engine repair markets during CONEXPO-CON/AGG in Las Vegas, Nev., on March 7-11, 2017. The brands exhibited during the show were Abex® friction products, FP Diesel® engine components, MOOG® heavy-duty u-joints and steering products, National® oil seals, and Wagner® lighting products.

Abex Air Disc Brake Pads
Abex Air Disc Brake Pads includes, the most popular Air Disc Brake application in North America, contain OE-quality formulations designed for enhanced stopping power and extended disc pad and rotor life. Manufactured at Federal-Mogul Motorparts’ certified facility in Kentucky, these pads meet Global ISO performance and wear standards.

Abex Reduced Stopping Distance Brake Block
Abex RX 6297 RSD includes certified commercial grade friction linings. The range exceeds both the Federal Motor Vehicle Safety Standards (FMVSS) 121 and Reduced Stopping Distance (RSD) requirement. The highly advanced, copper-free, crack-resistant lining offers excellent lining and drum wear.

FP Diesel POWERFORGED® One-Piece Steel Pistons for Cummins® QSX15 engines
FP Diesel’s exclusive POWERFORGED one-piece friction welded steel pistons are made from forged steel providing exceptional strength and durability. The unique closed cooling gallery holds more oil and allows it to reach more of the piston’s interior surfaces, maximizing cooling, which leads to reduces piston deformity and increases support to the ring lands.

MOOG Heavy-Duty U-Joints
MOOG Universal Joints satisfy the design requirements for original equipment and are built to stringent tolerances using the highest quality manufacturing processes. They feature radial lubrication grooves and anti-drainback properties to provide optimal lubrication flow. The exclusive thrust water design absorbs axial loads, preventing metal-to-metal contact.

MOOG Heavy-Duty Steering Products
MOOG Steering Products are designed for the most demanding applications. Our all-metal joint designs coupled with patented manufacturing process provide one of the lowest axial deflection rates in the market. Less deflection, internal grease passage and sealed boots all together provide longer life and superior performance in high load and extreme condition applications.

National Oil Bearings, Seals and Wheel-end Products
It features an exclusive PFTE compound that withstands extreme temperatures and provides superior containment exclusion technology for long life and low cost per mile operation.

Wagner LongLife HD Lamps, Miniature Lamps and Sealed Beam Headlamps
Wagner LongLife HD lamps include several features ideally suited to commercial vehicles, with extra-strength filaments.

 
 

View our loyalty programs - www.fmmp.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
 
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
www.championparts.in
www.ferodo.in
+91-124-4786701
customercare.india@federalmogul.com

 

February 2017

 

February 2017
PRODUCT LAUNCH MEDIA COVERAGE GLOBAL SNIPPETS
 

NEW PRODUCT INFORMATION

BAJAJ 3W – 4S
RING SET (2451GTP)
 
 
Set No: 2451GTP (against domestic set 2251GTP)
Diameter: 57.0
 
GROOVE RING TYPE SPECIAL FEATURES BENEFITS
1st
KV1: With inside bevel
Axial Height: 1.00 mm
Close Gap: 0.1 - 0.25
  • Chrome Plated for minimal wear & provides excellent scuff resistance thereby increasing engine life.
  • KV1 material for Greater break & wear resistance.
  • Barrel honing provides better sealing with line contact & high surface pressure.
  • Introduced with LOW CLOSE GAP
  • Longer Engine Life
  • More power
2nd
KV1: Chrome taper face
Axial Height: 1.00 mm
Close Gap: 0.1 - 0.30
  • Taper face for better blow by and oil consumption.
  • KV1 material for Greater break & wear resistance
  • Chrome plated for extended life
  • Introduced with LOW CLOSE GAP
  • More power
3rd
Steel: Chrome side rails
Axial Height: 2.00 mm
Close Gap: 0.1 - 0.50
  • Chrome plated rails ensures minimal wear & provides excellent scuff resistance thereby increasing engine life.
  • HIGH grade steel material for Greater break & wear resistance.
  • Introduced with HIGH TANG. TENSION & REDUCED CLOSE GAP
  • Lesser Oil Consumption
  • Longer Engine Life
 
Features and benefits:
  • As Cast crown and special aluminum alloy for strength.
  • Thin ring grooves for better sealing of gases & oil scrapping.
  • Oil holes in oil ring groove for lower oil consumption.
  • Modern design to reduce weight for better mileage.
BAJAJ GC CNG
RING SET (2474GTP)
 
 
Set No: 2474GTP (against domestic set 2274GTP)
Diameter: 61.0
 
GROOVE RING TYPE SPECIAL FEATURES BENEFITS
1st
KV1: With inside bevel
Axial Height: 1.00 mm
Close Gap: 0.1 - 0.25
  • NITRIDED Treated for minimal wear & provides excellent scuff resistance thereby increasing engine life.
  • HIGH grade steel material for Greater break & wear resistance.
  • Barrel honing provides better sealing with line contact & high surface pressure.
  • Introduced with HIGH TANG TENSION
  • Longer Engine Life
  • More power
2nd
KV1: With inside bevel
Axial Height: 1.00 mm
Close Gap: 0.1 - 0.25
  • Taper face for better blow by and oil consumption
  • KV1 material for Greater break & wear resistance.
  • Chrome plated for extended life
  • Introduced with LOW CLOSE GAP
  • More power
3rd
KV1: With inside bevel
Axial Height: 1.00 mm
Close Gap: 0.1 - 0.25
  • Chrome plated rails ensures minimal wear & provides excellent scuff resistance thereby increasing engine life.
  • HIGH grade steel material for Greater break & wear resistance.
  • Introduced with HIGH TANG. TENSION & REDUCED CLOSE GAP
  • Lesser Oil Consumption
  • Longer Engine Life
 
Features and benefits:
  • As Cast crown and special aluminum alloy for strength.
  • Thin ring grooves for better sealing of gases & oil scrapping.
  • Oil holes in oil ring groove for lower oil consumption.
  • Modern design to reduce weight for better mileage.
FT 60 / 70 AVL
RING SET (8416SHAKTI)
 
 
Set No: 8416SHAKTI
Diameter: 111.76
 
GROOVE RING TYPE SPECIAL FEATURES BENEFITS
1st
KV1: Rect. Chrome Inlaid, I/s bevel
Axial Height: 2.385 mm
Close Gap: 0.3 - 0.5
  • Chrome Coated Inlaid with phosphating, ensures minimal wear & provides excellent scuff resistance.
  • KV1-high strength material for greater break & wear resistance.
  • I/s bevel at top for positive twist action to reduce blow-by.
  • Barrel honing provides better sealing with line contact & high surface pressure.
  • Longer Ring Life
  • More power
2nd
IKA, Tapper Face, Rev. torsion, Phosphated
Axial Height: 2.385 mm
Close Gap: 0.35-0.65
  • Phosphated for lesser friction & reduces bedding in time.
  • Reverse Torsion by internally stepped at bottom for lower oil consumption.
  • More power
  • Lesser Oil Consumption
3rd
Chrome coated, Profile Ground oil ring, Spring loaded
Axial Height: 3.50 mm
Close Gap: 0.4 - 0.65
  • Profile ground contact land for higher radial pressure & better oil scraping effect.
  • Chrome coated lands provide higher wear resistance & excellent scuff resistance.
  • Lesser Oil Consumption
  • Longer Ring Life
BALWAN TRACTOR
RING SET (8647SHAKTI)
 
 
Set No: 8647SHAKTI
Diameter: 90.9
 
GROOVE RING TYPE SPECIAL FEATURES BENEFITS
1st
Chrome plated with LSE
Axial Height: 3.00 mm
Close Gap: 0.2 - 0.45
  • Chrome plated with phosphating, ensures minimal wear & provides excellent scuff resistance.
  • KV1-high strength material for greater break & wear resistance.
  • Barrel Honed ring for low Lube oil consumption.
  • Longer Ring Life
  • More power
2nd
Plain Taper faced
Axial Height: 2.0 mm
Close Gap: 0.4-0.6
  • Phosphated for lesser friction & reduces bedding in time.
  • High Strength material – IKA.
  • POSITIVE Torsion by internally stepped at top for lower blow by
  • More power
  • Lower blow by
3rd
Axial Height: 4.0 mm
  • Profile ground contact land for higher radial pressure & better oil scraping effect.
  • Chrome coated lands provide higher wear resistance & excellent scuff resistance.
  • Lesser Oil Consumption
  • Longer Ring Life
MAHINDRA 265DI
PISTON ASSEMBLY (05676PPC)
 
         
 
Piston Dimensions (mm)
DIAMETER 88.9
TOTAL HEIGHT 84.45
PIN DIAMETER 28
RING 8615CKS
 
Features and benefits:
  • Advanced Moly-Coated Skirt for reduced cold scuffing.
  • NI-Resist CI Ring Carrier in 1st Ring Groove for more life
  • J groove below oil ring for better oil consumption
MAHINDRA ARJUN
PISTON ASSEMBLY (05603PPC)
 
         
 
Piston Dimensions (mm)
DIAMETER 96.0
TOTAL HEIGHT 90.2
PIN DIAMETER 29
RING 8205TKFDCES
 
Features and benefits:
  • Advanced Moly-Coated Skirt for reduced cold scuffing.
  • NI-Resist CI Ring Carrier in 1st Ring Groove for more life
  • J groove below oil ring for better oil consumption
MAHINDRA ARJUN NEF (SS110)
PISTON ASSEMBLY (05810PPC)
 
         
 
Piston Dimensions (mm)
DIAMETER 94.0
TOTAL HEIGHT 89.96
PIN DIAMETER 29
RING 8417CKS
 
Features and benefits:
  • Graphite coated for better initial lubrication
  • NI-Resist CI Ring Carrier in 1st Ring Groove for more life
  • J groove below oil ring for better oil consumption
MAHINDRA 295DI
PISTON ASSEMBLY (05670PPC)
 
         
 
Piston Dimensions (mm)
DIAMETER 88.9
TOTAL HEIGHT 84.45
PIN DIAMETER 28
RING 8615CKS
 
Features and benefits:
  • Graphite coated for better initial lubrication
  • NI-Resist CI Ring Carrier in 1st Ring Groove for more life
  • J groove below oil ring for better oil consumption
MAHINDRA ARJUN NEF NEW MODEL
PISTON ASSEMBLY (08320PPC)
 
         
 
Piston Dimensions (mm)
DIAMETER 94
TOTAL HEIGHT 89.96
PIN DIAMETER 29
RING 8417CKS
 
Features and benefits:
  • Graphite coated for better initial lubrication
  • NI-Resist CI Ring Carrier in 1st Ring Groove for more life
  • J groove below oil ring for better oil consumption
TATA IRIS / MAGIC
BLOCK KIT (01482MPL0SD0000C1)
 
Features:
  • AL – SI ALLOY for less expansion and durability
  • High performance piston rings – 2025TKFDCES
  • Oil holes in oil ring groove for lower oil consumption.
  • Introductory offer – Traveller bag with 2 Kits
CYLINDER LINER
 
MODEL SET NO PACKING
PERKINS S3 FULLY FINISH 0045SHFLINSDC1 3 CYLINDER
PERKINS S3 SEMI FINISH 0045SHPLINSDC1 3 CYLINDER
M & M 295 DI 0074FFLINSDC1 SINGLE CYLINDER
PERKINS S3 FULLY FINISH 00451SFLINSDC1 SINGLE CYLINDER
PERKINS S3 SEMI FINISH 00451SPLINSDC1 SINGLE CYLINDER
RENAULT KWID
SPARK PLUG (REA8MC)
 
Parameter Specification
Hexagon Size 14mm
Insulator Shape 9mm Ø Ribless
Terminal Solid post
Seat Gasket seat
Thread and Thread Length M12 x 1,25mm / 26.5mm
 
Feature:
  • Superior corrosion resistance
  • Dependable and proven performance
  • Increased conductivity and heat control for good overall wear
 

MEDIA COVERAGE

Champion/Ferodo brand vehicle was launched from Corporate Office, Gurgaon on Feb 6th

This Toyota make van, equipped with latest audio/visual tech, LED display with storage/display space for products has been designed keeping in view the Champion spirit of Motorsports and Ferodo Heritage.

It has started campaigns around North Zone and its schedule has been frozen on monthly basis with dedicated team monitoring its route and usage. It has on board Champion/Ferodo merchandise for distribution along with training/corporate videos for customer/installers.

This along with the existing Goetze brand vehicle will increase our reach in hinterland, help improve brand image while improving service levels for our customers.

During first week of campaigns, it has got rave reviews from all audience and market in general with people leaving there establishments to have a look at the interiors.

Moving forward, this van will cover all zones in phases and will be involved in various local promotional activities.

With its stunning looks, it is truly going to be a head turner!!

 

Champion website launched

Its a proud moment for all of us to have Champion Website operational. This is our second brand website after GOETZE. The website will help all our channel partners and end customers to know our complete product range. It will also give brief about the new promotional event related to Champion brand across India & globally.

The website talks about not only the hard core product range but also the essence of CHAMPION Brand. It will be a great online support to our sales team during their market visits for ready reference. All the part numbers and their application will also be listed in that. This is a dynamic platform and will be updated frequently with bundles of useful information.

Our new site is divided into following main sections:
  • Products
  • Learning Centre
  • Promotions
  • Be A Champion
URL: WWW.CHAMPIONPARTS.IN
 

GLOBAL SNIPPETS

Federal-Mogul Motorparts to Highlight its Commercial Vehicle Offerings at HDAW in Las Vegas

Federal-Mogul Motorparts, a division of Federal-Mogul Holdings Corporation highlighted its leading commercial vehicle products for the wheel end, visibility and engine repair markets during Heavy-Duty Aftermarket Week 2017 (HDAW) in Las Vegas, Nev., January 23-26. The company’s featured brands include Abex® friction products, FP Diesel® engine components, National® oil seals, and Wagner® lighting products.

About Federal-Mogul

Federal-Mogul Motorparts, a division of Federal-Mogul Holdings Corporation highlighted its leading commercial vehicle products for the wheel end, visibility and engine repair markets during Heavy-Duty Aftermarket Week 2017 (HDAW) in Las Vegas, Nev., January 23-26. The company’s featured brands include Abex® friction products, FP Diesel® engine components, National® oil seals, and Wagner® lighting products.

Federal-Mogul Holdings Corporation (NASDAQ:FDML) is a leading global supplier of products and services to the world’s manufacturers and servicers of vehicles and equipment in the automotive, light, medium and heavy-duty commercial, marine, rail, aerospace, power generation and industrial markets. The company’s products and services enable improved fuel economy, reduced emissions and enhanced vehicle safety.

Federal-Mogul operates two independent business divisions, each with a chief executive officer reporting to Federal-Mogul's Board of Directors.

Federal-Mogul Motorparts sells and distributes a broad portfolio of products through more than 20 of the world’s most recognized brands in the global vehicle aftermarket, while also serving original equipment vehicle manufacturers with products including braking, wipers and a range of chassis components. The company’s aftermarket brands include ANCO® wipers; Beck/Arnley® premium OE quality parts and fluids; BERU®* ignition systems; Champion® lighting, spark plugs, wipers and filters; Interfil® filters; AE®, Fel-Pro®, FP Diesel®, Goetze®, Glyco®, Nüral®, Payen® and Sealed Power® engine products; MOOG® chassis components; and Ferodo®, Jurid® and Wagner® brake products and lighting.

Federal-Mogul Powertrain designs and manufactures original equipment powertrain components and systems protection products for automotive, heavy-duty, industrial and transport applications. Federal-Mogul was founded in Detroit in 1899 and maintains its worldwide headquarters in Southfield, Michigan. The company employs nearly 50,000 in 34 countries. For more information, please visit www.FMMotorparts.com.

Among the commercial vehicle repair solutions company’s exhibit exhibited Abex Air Disc Brake Pads, Reduced Stopping Distance (RSD) Brake Block, FP Diesel POWERFORGED® One-Piece Steel Pistons for Cummins® ISX15 engines, National Oil Bearings, Seals and Wheel-end Products, Wagner LongLife HD Lamps, Miniature Lamps and Sealed Beam Headlamps.

 
 

View our loyalty programs - www.fmmp.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
+91-124-4786701
customercare.india@federalmogul.com

 

January 2017

 

 

January 2017
PRODUCT LAUNCH MEDIA COVERAGE GLOBAL SNIPPETS
 

NEW PRODUCT INFORMATION

HONDA DREAM YUGA / NEO
PISTON ASSEMBLY (1043GMP)
 
     
 
Piston Dimensions (mm)
CYL. BORE DIA. (Nominal) 50.0
COMPRESSION. HT. 17.9
TOTAL HT. 36.9
PISTON-LINER CLEARANCE 0.025 (approx.)
PIN OD x ID x LENGTH 12.0/ 8.0x 32.5
Top Ring Groove (width) 0.81
2nd Ring Groove (width) 0.81
Oil Ring Groove (width) 1.51
 
Features and benefits:
  • As Cast crown and special aluminum alloy for strength.
  • Thin ring grooves for better sealing of gases & oil scrapping.
  • Oil holes in oil ring groove for lower oil consumption.
  • Modern design to reduce weight for better mileage.
HONDA DREAM YUGA / NEO
RING SET (2308GTX)
 
   
 
Groove Ring Feature Ax. Ht. (mm) End Gap (mm)
1st Comp Steel Gas Nitrided 0.8 0.10-0.30
2nd Comp Taper faced, Phos. 0.8 0.10-0.30
3rd Oil 3POR, Zin/Tin coated Steel 1.5 0.10-0.70
 
Features and benefits:
  • As Cast crown and special aluminum alloy for strength.
  • Thin ring grooves for better sealing of gases & oil scrapping.
  • Oil holes in oil ring groove for lower oil consumption.
  • Modern design to reduce weight for better mileage.
HONDA ACTIVA 3G/I/DIO 110cc
PISTON ASSEMBLY (1984GMP)
 
     
 
Piston Dimensions (mm)
CYL. BORE DIA. (Nominal) 50.0
COMPRESSION. HT. 18.5
TOTAL HT. 34.5
PISTON-LINER CLEARANCE 0.025 (approx.)
PIN OD x ID x LENGTH 12.0/ 8.0x 32.5
Top Ring Groove (width) 0.81
2nd Ring Groove (width) 0.81
Oil Ring Groove (width) 1.51
 
Features and benefits:
  • As Cast crown and special aluminum alloy for strength.
  • Thin ring grooves for better sealing of gases & oil scrapping.
  • Oil holes in oil ring groove for lower oil consumption.
  • Modern design to reduce weight for better mileage.
HONDA ACTIVA 3G/I/DIO 110cc
RING SET (2455GTX)
 
   
 
Groove Ring Feature Ax. Ht. (mm) End Gap (mm)
1st Comp Steel Gas Nitrided 0.8 0.10-0.30
2nd Comp Taper faced, Phos. 0.8 0.10-0.30
3rd Oil 3POR, Zin/Tin coated Steel 1.5 0.10-0.70
 
Features and benefits:
  • As Cast crown and special aluminum alloy for strength.
  • Thin ring grooves for better sealing of gases & oil scrapping.
  • Oil holes in oil ring groove for lower oil consumption.
  • Modern design to reduce weight for better mileage.
 

MEDIA COVERAGE

Federal Mogul Motorparts participated in 1st ACMA Aftermarket Expo in Guwahati. The exhibition was managed in association with Ministry of Heavy Industries & Public Enterprises, on 26th & 27th November 2016 at Maniram Dewan Trade Centre, Guwahati.

Distributors, retailers and other channel partners visited the exhibition from entire North East region including Guwahati, Jorhat, Silchar, Tinsukhia, Tezpur, Shillong, Dimapur, Kohima, Imphal, Aizawl, Itanagar, Agartala and Gangtok. Acknowledging the huge potential in North East region for Auto component players, ACMA organized this Expo for after market players for the first time.

It was a great opportunity to bring together quality auto component manufacturers to showcase their products and capabilities in the growing North East India aftermarket.

 

GLOBAL SNIPPETS

Federal-Mogul Supplies Engine Technologies for All 10 of Wards 10 Best Engines for 2017

Federal-Mogul provides a wide range of components for these engines, including pistons, piston rings, cylinder liners, valve seats and guides, engine valves, engine bearings, spark plugs, sealing, gaskets, heat shields and systems protection products. Presented by WardsAuto during the North American International Auto Show, Wards 10 Best Engines awards has built a reputation as the auto industry's annual barometer of powertrain expertise.

 
 

View our loyalty programs - www.fmmp.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
+91-124-4786701
customercare.india@federalmogul.com

 

December 2016

 

 
  PART'S MATTER
NEW PRODUCT INFORMATION :ENGINE
MEDIA COVERAGE
GLOBAL SNIPPETS
 

HARVESTER 102mm - COLLAR TYPE
ENGINE CYLINDER LINER (00881T0LINSDC1)

Features:
  • Nom. Dia. : 102mm
  • 6 cyl. Engine inlet
  • Semi-Finished
  • Special Goetze Alloy for better performance
  • Bore Inner Dia. = 101.35 MM
  • Collar Dia. = 105.662 MM
  • Total Length = 200 MM
  • Collar Width= 6 MM
 

BAJAJ 3W-4S SLEEPER
PISTON RING SET (2451GTP)

Features:
  • TOP Ring- Chrome plated, Flat face, I/s bevel top, Ferroxided, Steel matl. - Ax. Ht. 1.0mm
  • 2nd Comp. Ring- Chrome plated, Taper face, Phos., KV1 matl.- Ax. Ht. 1.0mm
  • Oil Ring- 3 Piece Oil Ring- Ax. Ht. 2.0 mm
 

YAMAHA RX 100 CYLINDER BLOCK KIT
PART NO (01370GPL)

 
We are delighted to introduce RX 100 cylinder block Kit - Part No (01370GPL) with premium features.
 
 
The matching ring set is 1205DKDC.
Engine spec: 98 cc 2-stroke, reed valve, air-cooled, single-cylinder, gasoline 7 port torque induction.
  • Special Alloy Piston - Lesser expansion & more durable at high temperatures
  • Innovative Rings - With high strength & better compression
  • Aluminium block - Light body for smooth running
  • Cast Iron Sleeve - Lesser piston-liner clearance and lesser wear
Click here for more details
 

MODEL NO. MSIL 90 PS (MARUTI ERTIGA / CIAZ / SX4 / BALENO)

Model Set No Features
MSIL 90 PS 03467PPCSD0000C1
  • Cooling gallery for thermal stability at peak temperature
  • High Strength alloy for thermal stability at peak temperature
  • NI-resist groove insert for less ring groove wear
  • Optimised OD profile
  • Oil holes on pin bore for better lubrication
 
 

MEDIA COVERAGE

 
 
 

BE A CHAMPION PLANTATION DRIVE

 
Team Champion conducted a plantation drive at Paras Trade Centre, Gurgaon(HO office).
The activity was taken very enthusiastically by all the team members for the betterment of environment and celebrating the Champion spirit.
 
 

FERODO BRANDED VEHICLE

 
 
Champion & Ferodo Van will cover multiple cities and states showcasing complete range of Braking ( Brake Pads/Shoes , Brake Linings , Clutch Shoes and Plates & Brake Fluid ) & Service (Spark Plugs , Wiper Blades , Ignition Coils and Radiator Coolant). It will also display the technological prowess and R&D facilities.
 
 
 
 

GLOBAL SNIPPETS

 
 
Garage Gurus Scholarship Program
 
 
Garage Guru is the national training program which is designed to help front-line automotive service professional keeping in mind the latest vehicle technologies. For the third consecutive year, Federal Mogul Motorparts will award $30,000 scholarships to future automotive technicians. This scholarship is the part of company’s program “Tech First “which deals with nationwide network of technical educational centres.
Federal Mogul Motorsparts will award $2500 Garage Gurus Automotive Technician Scholarships for the year 2017-18.
 
Goezte participation in Automechanika, Shanghai
 

Federal-Mogul Motorparts (India) showcased its products for the first time at the recent 2016 Automechanika, Shanghai.

Displayed were 2/3 wheeler brake shoes and 2 wheeler brake pads under Ferodo brand. Iridium, CNG and Power spark plugs under Champion brand.
Along with these, Goetze Bi Wheeler Block Kits, Piston & Piston Rings & Engine Valves were also exhibited.

 
 
 

View our loyalty programs - www.fmmp.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
+91-124-4786701
customercare.india@federalmogul.com

 

November 2016

 

 

 
  PART'S MATTER
NEW PRODUCT INFORMATION :
ENGINE / SERVICE
MEDIA COVERAGE
GLOBAL SNIPPETS
 

TOYOTA ETIOS LIVA
PISTON RING SET (5803GTP)

 
Cylinder Bore Diameter – 72.5 mm
Groove Ring Type Special Features Benefits
1st
Steel - PVD Coated Barrel
Axial Ht. - 1.0 mm
  • PVD Coating ensures minimal wear & provides excellent scuff resistance thereby increasing engine life.
  • High grade steel material for Greater break & wear resistance.
  • Barrel honing provides better sealing with line contact & high surface pressure.
  • Longer Engine Life
  • More Power
2nd
Steel - Chrome Plated
Axial Ht. - 1.0 mm
  • Napier ring for better blow by and oil consumption
  • High grade steel material for Greater break & wear resistance.
  • Chrome plated for extended life
  • More Power
3rd
Steel - PVD Coated
Axial Ht. - 2.0 mm
  • PVD Coating ensures minimal wear & provides excellent scuff resistance thereby increasing engine life.
  • High grade steel material for Greater break & wear resistance.
  • Lesser oil consumptiom
  • Longer engine life
 

MARUTI ERTIGA / BREZZA / CIAZ
PISTON (03467PPC)

DIAMETER TOTAL HEIGHT PIN DIAMETER MATCHING RING
69.6 62.4 23 5763CKS
Features
  • Oil gallery for better cooling of piston to give best performance under severe conditions
  • Moly-Coated Skirt for reduced cold scuffing & better mileage
  • NI-Resist CI Ring Carrier in 1st Ring Groove for more life
 

CUMMINS NT 855 - BIG CAM
PISTON (BEB8026)

 
FEATURES:-
  • Dual NI Resist
  • CNC turned bowl
  • Angular oil holes for better oil drainage
 
DIAMETER TOTAL HEIGHT PIN DIAMETER RING VERSION MATCHING RING
139.7 159.6 50.77 4 BEB8004 (AE8004)
BEB8023 (AE8023)
 

CUMMINS NT
PISTON (BEB8022)

 
FEATURES:-
  • NI Resist
  • CNC turned bowl
  • Angular oil holes for better oil drainage
 
DIAMETER TOTAL HEIGHT PIN DIAMETER RING VERSION MATCHING RING
139.7 151.7 50.77 4 BEB8004 (AE8004)
BEB8023 (AE8023)
 

BAJAJ COMPACT
ENGINE VALVE (GV1029)

Features:
  • Exhaust valve – Bi metallic steel
  • Inlet - Steel
 

HARVESTER 102mm - COLLAR TYPE
ENGINE CYLINDER LINER (00881T0LINSDC1)

Features:
  • Nom. Dia. : 102mm
  • 6 cyl. Engine inlet
  • Semi-Finished
  • Special Goetze Alloy for better performance
  • Bore Inner Dia. = 101.35 MM
  • Collar Dia. = 105.662 MM
  • Total Length = 200 MM
  • Collar Width= 6 MM
 

RENAULT KWID (0.8L and 1.0 L)
SPARK PLUG (CCHREA8MCAM)

Parameter Specification
Hexagon Size 14mm
Insulator Shape 9mm Ø Ribless
Terminal Solid Post
Seat Gasket Seat
Thread and Thread Length M12 x 1.25mm / 26.5mm
 
  • Superior corrosion resistance
  • Dependable and proven performance
  • Increased conductivity and heat control for good overall wear
 
 

MEDIA COVERAGE

 
 
Ferodo Quick Stop Range Launched:
We are happy to announce launch of world renowned Ferodo Quick Stop range of 4W Car brake pads. 59 part numbers covering wide range of applications and providing OE specification brake pads. Also, an exciting program for Retailers to participate and win exciting prizes.
 
 

GLOBAL SNIPPETS

 
 

Martin Rump, racing Champ for our Champion brand has made historical win by winning back –to-back 50 kilogrammes racing which was held in Shanghai in November this year. This is his 5th win after securing four victories in this season. Martin shared some of his experiences and quoted few words as below
"I enjoy leading from lights-out because I know I’m very good at it. It helps me to show how fast I can be and what I’m capable of in terms of consistency and pace".

 

Automechanika Shanghai is world’s second largest trade fair for Automotive Service Industry, which is going to held at National Exhibition and Convention Centre in Shanghai, China. The duration for this trade fair will last for 4 days which will start from 30th Nov’16 and last up to 3th Dec’2016. It will focus on various aspects such as Automobile Accessories, Tuning and parts, Maintenance Automobile Components & Electronics. Federal Mogul Motorparts will be participating in this event and welcomes you to visit.

 
 
 

View our loyalty programs - www.fmmp.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
+91-124-4786701
customercare.india@federalmogul.com

 

October 2016

 

 

 
  PART'S MATTER
NEW PRODUCT INFORMATION :
ENGINE / BRAKING / SERVICE
MEDIA COVERAGE
GLOBAL SNIPPETS
 

INTRODUCING NEW OE+ PISTON

 
HONDA ACTIVA 110CC HONDA UNICORN HONDA ACTIVA
 
MODEL SET NO FEATURES MATCHING RING
HONDA ACTIVA 110CC 01982OE+
  • Ceramic Coated Crown & Ring Grooves
  • Moly Coated skirt
2296GTP
HONDA ACTIVA 1940OE+ 2240GTP
HONDA UNICORN 1019OE+ 2268GTP
HONDA SHINE 1018OE+ 2273GTP
HERO HONDA SUPER SPLENDOR 1016OE+ 2263GTP
 

HONDA CG 125
PISTON ASSEMBLY (01384GMP)

 
We are delighted to introduce HONDA CG 125 Piston assembly with premium features.
  • Crown machined and as cast valves
  • Angular oil holes for better oil drainage
  • Lug type design
Top Ring Rectangular gas nitrited
Second Ring Taper faced KV1
Third Ring 3POR
 

MERCEDES OM 355 NA
PISTON ASSEMBLY (04761PPC)

 
  • High silicon content alloy for stability at elevated temperature
  • Phosphated and moly coated
  • Ring carrier for long life
  • Diameter: 128.0
  • Total Height: 161.06
  • Pin Diameter: 48
  • Ring Version: 4
 

TOYOTA ETIOS LIVA
PISTON RING SET (5803GTP)

 
In continuation to our new launch, we are delighted to introduce piston ring set in four cylinder packing.
Cylinder Bore Diameter – 72.5 mm
Groove Ring Type Special Features Benefits
1st
Steel - PVD Coated Barrel
Axial Ht. - 1.0 mm
  • PVD Coating ensures minimal wear & provides excellent scuff resistance thereby increasing engine life.
  • High grade steel material for Greater break & wear resistance.
  • Barrel honing provides better sealing with line contact & high surface pressure.
  • Longer Engine Life
  • More Power
2nd
Steel - Chrome Plated
Axial Ht. - 1.0 mm
  • Napier ring for better blow by and oil consumption
  • High grade steel material for Greater break & wear resistance.
  • Chrome plated for extended life
  • More Power
3rd
Steel - PVD Coated
Axial Ht. - 2.0 mm
  • PVD Coating ensures minimal wear & provides excellent scuff resistance thereby increasing engine life.
  • High grade steel material for Greater break & wear resistance.
  • Lesser oil consumptiom
  • Longer engine life
 
 

RENAULT KWID (0.8L and 1.0 L)
SPARK PLUG (CCHREA8MCAM)

Parameter Specification
Hexagon Size 14mm
Insulator Shape 9mm Ø Ribless
Terminal Solid Post
Seat Gasket Seat
Thread and Thread Length M12 x 1.25mm / 26.5mm
 
  • Superior corrosion resistance
  • Dependable and proven performance
  • Increased conductivity and heat control for good overall wear
 
 

MEDIA COVERAGE

 
 

Start Everyday Knowing Your Engine Will Start Too

 
 
 

GLOBAL SNIPPETS

 
 

FM Garage Guru initiative opens up in China

 

Garage Gurus is a major "Tech First" initiative from Federal-Mogul Motorparts that's exclusively designed with the tech in mind – providing the most comprehensive program of support tools in the industry. We believe that trained and informed techs are the heart of the rapidly changing vehicle repair industry. Onsite, online and on-demand, Garage Gurus is committed to arming techs with the latest tools and information so they can keep pace with emerging vehicle technologies.

 
 

CHECK IF PRODUCT IS GENUINE

 
Alphanumeric code indentification Visit www.fmmp.in and click on verification link on the top left corner.
 
In the pop up window, fill the last 8 digits of the coupon on product. System will give back the message of a product being valid or invalid along with the SKU.
 
 
 

View our loyalty programs - www.fmmp.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
FEDERAL MOGUL MOTORPARTS
7th Floor, Paras Trade Centre,
Gwal Pahari,
Sec 2, Gurgaon - 122003
www.goetzeparts.in
+91-124-4786701
customercare.india@federalmogul.com

 

September 2016

 

 

 
  PART'S MATTER
NEW PRODUCT INFORMATION :
ENGINE / BRAKING
MEDIA COVERAGE
GLOBAL SNIPPETS
 

RENAULT MICRA/PULSE
K9K STEP-1 (03455PPC)

Features
  • CNC turned crown cavity for correct compression ratio
  • NI-Resist CI Ring Carrier in 1st Ring Groove for more life
  • Moly-Coated Skirt for reduced cold scuffing & better mileage
  • Oil gallery for better cooling of piston to give best performance under severe conditions
  • Advanced piston design for more mileage & reduced noise (Lug type)

RENAULT DUSTER
K9K STEP-4 (03465PPC)

Features
  • CNC turned crown cavity for correct compression ratio
  • NI-Resist CI Ring Carrier in 1st Ring Groove for more life
  • Moly-Coated Skirt for reduced cold scuffing & better mileage
  • Oil gallery for better cooling of piston to give best performance under severe conditions
  • Advanced piston design for more mileage & reduced noise (Lug type)
 

YAMAHA CRUX/ LIBERO CYLINDER BLOCK KIT

 
We are delighted to introduce Yamaha Crux/ Libero cylinder block Kit - Part No (01251GPL) with premium features.
 
 
The matching ring set is 2243GDP
Engine Spec:106 cc 4-stroke
It has SOHC, 2-valve & kerb weight 113Kg.
  • Special Alloy Piston - Lesser expansion & more durable at high temperatures
  • Innovative Rings - With high strength & better compression
  • Aluminium block - Light body for smooth running
  • Cast Iron Sleeve - Lesser piston-liner clearance and lesser wear
Click here for more details
 

APE BS-III (with 2033TKIDCES-SD Ring set) PISTON ASSEMBLY (01154MP+)

 
 
 
We are delighted to introduce APE BS-III Piston assembly with 2033TKIDCES Ring set - Part No (01154MP+) with premium features.
  • Higher performing ring set (2033TKIDCES-SD) has been now made a part of the piston assembly.
  • 1st Ring- Chrome, Semi-inlaid, Inside-step cut, Phos. KV1 matl.- Ax. Ht.2.0mm
  • 2nd Ring- Taper faced, OD honed, Phos., IKA matl.- Ax. Ht.2.0mm
  • Oil Ring- Chrome coated Oil control ring with Coil spring-Ax. Ht.3.0mm
The other ring version (2029) will also be available, thus giving more options for the customers to choose
 

HONDA CB TWISTER/ PASSION XPRO
RING SET (2307GTP)

 
 
 
Introducing Re-ringing ring set for HONDA CB TWISTER/ PASSION XPRO
  • The high performing ring set is already part of the HONDA CB TWISTER piston assembly (part no. 1041GMP)
  • The ring set for nomical dia. of 50mm is highly in demand due to large vehicle sales.
  • Thin ring grooves for better sealing of gases & oil scrapping
 

HONDA SHINE & SUPER SPLENDOR
BLOCK KIT (01018MPL & 1016MPL)

 
 
 
Introducing silver colour cylinder blocks in Cylinder Liner Kit
  • Honda Motors has now introduced existing motocylcles (Honda Shine & Honda Supersplend) with silver engine body which, was earlier black.
  • To meet cylinder block kit requirement for this new variants we launched them in silver colour also.
  • The dimension and all other features remain the same.
 

INTRODUCING NEW CYLINDER LINER

 
SIMPSON PERKINS S3 CYLINDER LINER
(0045SHFLINSDC1 & 0045SHPLINSDC1)
MAHINDRA 295 TURBO CYLINDER LINER
(00741FFLINSDC1)
ASHOK LEYLAND 401/ 402 CYLINDER LINER
(0053000LINSEC6)
 

Liner has premium quality material for better heat transfer resulting in optimum running temperature and high durability. The liner comes as Semi-Finished to allow best piston-liner clearance for optimised engine performance.

The liners are Plateau honed, which reduced bedding-in period, reduces wear and improves lubrication.
 

RING SET FOR PERKINS 91.49 SINGLE CYLINDER
(8239CKS-SD)

 
Introducing Ring set no. 8239CKS-SD for PERKINS_91.49 as in single cylinder packing in Tractor segment

High permormance ring set having Chrome-ceramic (CKS) coating on top ring. CKS coating increases double wear resistance as compared to Chrome coating. It's grain structure improves lubrication to give high performance.

 
 

ENGINE BEARING FOR MARUTI GYPSY/ 1000CC
(01-4637/4)

 
Introducing Engine Connecting Rod Bearing for Maruti Gypsy/ 1000cc engine in Car segment
 

The Con-Rod bearing has steel back bone with Alluminium-Tin Alloy coating.

Features:
Hard material gives high fatigue strength & wear resistance.
Soft AT material gives anti-seizure properties, running-in, adaptibility and embedding properties.
 

ALUMINIUM RIVET FOR CV LINING

Pleased to launch the Aluminium rivet in two different sizes L12 & L10 for CV Lining under FERODO Brand.

The dimension of the rivet meets the required of all HCV &LCV lining. Holding strength and proper flaring is the best feature of this rivet. Accurate dimension and good holding strength establish tight fitment of Lining over shoes. Application of these rivets is as below.

L10- this rivet is suitable for all K47 grade HCV /LCV and K46 grade LCV lining.

L12 - this rivet is suitable for all K46 grade HCV lining.

Click here for more details
 

CLUTCH PLATES FOR 2 & 3 WHEELERS

Pleased to extend our FERODO 2W & 3W clutch plates ranges by introducing 14 new applications in BAJAJ, YAMAHA, HERO & TVS.

FERODO clutches are environmental friendly and produced by non asbestos material.

FERODO Clutch Plates grip is proper and establishes complete engagement between flywheel and gearbox so that there shouldn’t be any loss of energy takes place.

 
 

MEDIA COVERAGE

 
 
 

GLOBAL SNIPPETS

 
 

Congratulations to Martin Rump, our Champion team driver, for his 2nd position in race 8th, Audi R8LMSCup, Korea, 24th-25th September 2016. A Champion never gave up in a tough competition!

 
Martin Rump,Champion racing team driver at the left,with Alex Yoong and Marchy Lee. Photography by sportauto asia — at Korea International Circuit.
Tiur Limahelu, F-M Motorparts marketing manager with Martin Rump. Photography by sportauto asia— at Korea International Circuit.
 
 

Our Korean customers in front of Champion racing car.

 
 

HAS A PART FOR YOU

 
 

View our complete Goetze range - www.goetzeparts.in

View our loyalty programs - www.fmmp.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 

FEDERAL MOGUL MOTORPARTS

7th Floor, Paras Trade Centre, Gwal Pahari, Sec 2, Gurgaon - 122003
Tel.: +91-124-4784530 E-mail : customercare.india@federalmogul.com

 

August 2016

 

 
  PARTS MATTER
NEW PRODUCT INTRODUCTION
MEDIA COVERAGE
GLOBAL SNIPPETS
 

MOLY COATING
IN HARVESTOR SERIES

In our endeavour to innovate and improve product quality, we are delighted to introduce Moly Coating in Harvestor Series Goetze Pistons.
  • Helps with initial lubrication & prevents scuffing during cold start.
  • Excellent corrosion & wear resistance for longer life.
  • Exceptional dimensional accuracy & correct geome try.
  • Build to withstand high thermal load
This technology not available even in OE helps reinforce our commitment to provide Better Than OE products to Aftermarket.
For best performance Use 5313 Series Rings With 5811 and 5328 Series Rings with 5815
 

MODEL NO. FORD 3600

Model Set No Features
Ford 3600 Modified 05435PPC
  • CNC turned crown cavity for correct compression ration
  • NI-Resist CI Ring Carrier in 1st Ring Groove for more life
  • Moly-Coated Skirt for reduced cold scuffing & better mileage
  • Oil holes in oil ring groove for low oil consumption
  • Oil hole in Pin Bose for more engine output & more life
  • Advanced piston design for more mileage & reduced noise (Lug type)
  • Matching Ring 8273 series
COMPARISON WITH OE SUPPLY
Feature OE 05435PPC
Anti friction coating - Anti friction Moly Coating
Ring Land relief - Relief on ring land for low blow by and oil consumption
 

MODEL NO. MSIL 90 PS (MARUTI ERTIGA / CIAZ / SX4 / BALENO)

Model Set No Features
MSIL 90 PS 03467PPCSD0000C1
  • Cooling gallery for thermal stability at peak temperature
  • High Strength alloy for thermal stability at peak temperature
  • NI-resist groove insert for less ring groove wear
  • Optimised OD profile
  • Oil holes on pin bore for better lubrication
 

COMMERCIAL ENGINE VALVES

Part No Application Valves / Cylinder Material Coating
Inlet Exhaust Inlet Exhaust
GV01097N04 TATA 497 Non Turbo - STD 2V Single Metal Single Metal Chrome Chrome
GV01097N06 TATA 697 Non Turbo - STD 2V Single Metal Single Metal Chrome Chrome
GV01097N06 TATA 697 Turbo - STD 2V Single Metal Single Metal Nitrided Nitrided
GV01097N04 TATA 497 Turbo - STD 2V Single Metal Single Metal Nitrided Nitrided
GV05102T06 HARVESTOR B SERIES EUR II STD/003/005/010/015/020 2V Single Metal B Metal Chrome Chrome
GV05102T12 HARVESTOR B SERIES EUR III MOD-STD/003/005 4V Single Metal B Metal Chrome Chrome
GV02104T06 LAYLAND HINO TC (6CYL) 2V Single Metal B Metal Chrome Nitrided
GV02104T04 LAYLAND HINO TC (4CYL) 2V Single Metal B Metal Chrome Nitrided
 

YAMAHA RX 100 CYLINDER BLOCK KIT
PART NO (01370GPL)

 
We are delighted to introduce RX 100 cylinder block Kit - Part No (01370GPL) with premium features.
 
 
The matching ring set is 1205DKDC.
Engine spec: 98 cc 2-stroke, reed valve, air-cooled, single-cylinder, gasoline 7 port torque induction.
  • Special Alloy Piston - Lesser expansion & more durable at high temperatures
  • Innovative Rings - With high strength & better compression
  • Aluminium block - Light body for smooth running
  • Cast Iron Sleeve - Lesser piston-liner clearance and lesser wear
Click here for more details
 

YAMAHA RX 135 CYLINDER BLOCK KIT
PART NO (01610GPL)

 
We are delighted to introduce RX 135 cylinder block Kit - Part No (01610GPL) with premium features.
 
 
 
The matching ring set is 1204DKDCHE.
Engine spec: 132 cc 2-stroke, reed valve, air-cooled, single-cylinder, gasoline 7 port torque induction.
  • Special Alloy Piston - Lesser expansion & more durable at high temperatures
  • Innovative Rings - With high strength & better compression
  • Aluminium block - Light body for smooth running
  • Cast Iron Sleeve - Lesser piston-liner clearance and lesser wear
 
Click here for more details
 

CLUTCH PLATES FOR 2 & 3 WHEELERS

We are pleased to announce range extension in 2 & 3 Wheeler clutch plates under our illustrious brand Ferodo.

Asbestos Free Friction formulation
Superior quality friction material

Effective in engaging and disengaging power transmissions
For smooth shifting of gears

Part No Application Per Set
FCD1235 Yamaha Rx-100/ Crux / Fazer / Enticer 1
FCD0759 Bajaj Pulsar - 150 Dtsi/Discover Dtsi 1
FCD0768 Bajaj Pulsar - 180/Pulsar 180 Dtsi 1
FCD1236 Yamaha - Rx135 / Rxg 1
FCD1237 Yamaha - Crux S 1
FCD0778 3W 5Port 3
FCD0766 Bajaj Pulsar - 150 4
FCD0761 Bajaj Xcd 125 / 135 5
FCD0762 Bajaj Discover 135 Dtsi 5
FCD0764 CBZ / Ambition 135, Bajaj Wind - 125 5
FCD0769 TVS - Centra / Centravti Dlx 5
FCD0763 Pulsar 180 Ug4 6
FCD0765 Pulsar 180 Ug3 6
FCD0781 TVS King 2S 6
 

SPARK TECHNOLOGY. (RH, LH, CENTRE)

 
Introducing Bajaj Pulsar 200 NS using triple spark technology. (RH, LH, Centre)

Left hand(LH) Part No:-PRG 6HCC

Right hand (RH) Part No:-PRG 6HCC

Centre Part No:- RER 6YCA

AM Part No. Segment Series Description MRP
RER6YCA 2w Power Bajaj Pulsar 200NS 160
 
 

MEDIA COVERAGE

 
 
 

TEAM CHAMPION ROCKS
AUDI R8 LMS CUP IN THAILAND

 
 

20 year old Estonian national Martin Rump demonstrated his relentless spirit in the latest round of Audi R8 LMS Cup held in Buriram Thailand on the weekend of 23rd - 24th July. After an exciting and intense round 3, he started round 4 in a pole position, and he led from start to finish to take the win and attaining 3rd position in the LMS Cup series. The Champion® brand is one of the legendary brands in Federal-Mogul Motorparts' portfolio, serving the premium service parts segment worldwide. Recently, F-M MP Asia Pacific has rolled out their 'Be A Champion' marketing campaign, aiming to encourage people to walk the champion path in all areas of their lives. Both Asia Pacific Champion® brand Ambassadors Martin Rump and champion boxer Kerry Hope were honoured guests at the 'Be A Champion' night during the 2-day race. Kerry a former European middleweight champion boxer currently ranks 12th in the WBO middleweight division. Both he and Martin shared their stories of overcoming obstacles and consistently moving ahead to achieve broader objectives in their lives with the invited audience of customers, distributors and employees of F-M MP and PartsZone, Thailand.

 
 
 

View our complete Goetze range - www.goetzeparts.in

View our loyalty programs - www.fmmp.in

Download our e-catalogue - www.fmecat.in

Follow us on twitter - @goetzeparts

 
 
 
 

FEDERAL MOGUL MOTORPARTS

7th Floor, Paras Trade Centre, Gwal Pahari, Sec 2, Gurgaon - 122003
Tel.: +91-124-4784530 E-mail : customercare.india@federalmogul.com

 

My Part List

Name
E-mail